Metabo PowerMaxx BH 12 BL 16 - Инструкция по эксплуатации - Страница 10

ENGLISH

en

10

Drilling

Hammer drilling

7.4 Selecting the direction of rotation

Do not activate the direction switch (6) unless 

the motor has completely stopped.

Select direction of rotation:

R = clockwise rotation (for drilling, hammer 

drilling, drive in screws)

L = anti-clockwise rotation (for the removal of 

screws)

0 = Centre  position:  with  the transporting safety 

device engaged (switch-on lock)

7.5 Tool change with SDS chuck

Before fitting, clean tool shank and apply 

special grease (accessories order no. 

6.31800)! Use only SDS-Plus tools.

Inserting tools:

- Turn tool and insert until it engages. The tool is 

locked automatically.

Removing the tool:

See page 2, fig. A.
- Pull tool lock (1) backwards in direction indicated 

by arrow (a) and remove tool (b).

7.6 Metabo VibraTech (MVT)

For reduced vibrations and less stress on the 

hands.
Always apply a moderate amount of pressure to the 

handle when pushing down the machine and do not 

force. Vibrations are reduced most effectively at the 

central position (5).

-

Ventilation slits:

Clean the ventilation slits on the machine occa-

sionally.

- Remove the 

battery pack

 periodically and wipe 

the contact area of the battery pack and machine 

with a dry cloth and remove drilling dust.

f

Metabo S-automatic safety stop:

 The LED light 

(11) lights up and the machine SWITCHES OFF 

automatically. If the speed is too high (if the 

machine seizes suddenly), the machine switches 

off. Switch off the machine at the trigger switch (7). 

Switch it on again and continue to work as normal. 

Try to prevent the machine from seizing.

f

Use only original Metabo or CAS (Cordless Alliance 

System) battery packs and accessories.

Use only accessories that fulfil the requirements 

and specifications listed in these operating instruc-

tions. 
Fit accessories securely. If the machine is operated 

in a holder: secure the machine well. Loss of control 

can cause personal injury.

Batter chargers

: ASC 55, ASC 30-36, etc.

Battery packs with different capacities. 

Only 

use battery packs with voltage suitable for your 

power tool.
Order no.: 

625406000  ............... 12 V  2.0 Ah (LiPower)

625349000  ............... 12 V  4.0 Ah (LiHD)

etc.
625596000  ............... 18 V  2.0 Ah (LiPower)

625367000  ............... 18 V  4.0 Ah (LiHD)

etc.

For a complete range of accessories, see 

www.metabo.com or the catalogue.

Repairs to electrical tools must be carried out 

by qualified electricians ONLY! 

If you have Metabo electrical tools that require 

repairs, please contact your Metabo service centre. 

For addresses see www.metabo.com.
You can download spare parts lists from 

www.metabo.com.

Observe national regulations on environmentally 

compatible disposal and on the recycling of disused 

machines, packaging and accessories.
Packaging materials must be disposed of according 

to their labelling in accordance with municipal 

guidelines. Further information can be found at 

www.metabo.com in the “Service” section.
Battery packs must not be disposed of with regular 

waste. Return faulty or used battery packs to your 

Metabo dealer!
Do not allow battery packs to come into contact with 

water!

Only for EU countries: Never dispose of 

power tools in your household waste! In 

accordance with European Guideline 2012/

19/EU on used electronic and electric equipment 

and its implementation in national legal systems, 

used power tools must be collected separately and 

handed in for environmentally compatible recycling.

Before disposal, discharge the battery pack in the 

power tool. Prevent the contacts from short-circu-

iting (e. g. by protecting them with adhesive tape).

f

Explanation of details on page 3. Subject to 

changes serving technical progress.

U

= Voltage of battery pack

n

0

= No-load speed

8. Maintenance, cleaning

9. Troubleshooting

10. Accessories

11. Repairs

12. Environmental Protection

13. Technical Specifications