Metabo BH 18 LTX BL 16 - Инструкция по эксплуатации - Страница 8

ENGLISH

en

8

We declare and accept sole responsibility for 

ensuring: these cordless rotary hammers identified 

by their type and serial number *1) conform to all 

relevant provisions of the directives *2) and 

standards *3). Technical documents for *4) - see 

page 3.

With the appropriate accessories, the cordless 

rotary hammer is suitable for work with hammer drill 

bits in concrete, stone and similar materials and 

with core cutters in tiles and similar materials, as 

well as for non-impact drilling into metal, wood etc. 

and for driving screws.
The user bears sole responsibility for any damage 

caused by improper use.
Generally accepted accident prevention regula-

tions and the enclosed safety information must be 

observed.

For your own protection and for the 

protection of your electrical tool, pay 

attention to all parts of the text that are 

marked with this symbol!

WARNING

 – Reading the operating instruc-

tions will reduce the risk of injury.

WARNING Read all safety warnings and 

instructions.

Failure to follow all safety warn-

ings and instructions may result in electric shock, 

fire and/or serious injury.

Keep all safety instructions and information for 

future reference. 

Pass on your electrical tool only 

together with these documents.

Wear ear protectors.

 Exposure to noise can cause 

hearing loss.

Use the additional handle supplied with the 

tool.

 Loss of control can cause personal injury.

Hold tool by insulated gripping surfaces when 

performing an operation where the cutting 

accessory may contact hidden wiring

. If the 

cutting accessory contacts a "live" wire, exposed 

metal parts of the electrical tool may become "live" 

and give the operator an electric shock.
Work only with the additional handle correctly 

installed.
Always hold the machine with both hands using the 

handles provided, stand securely and concentrate.
Always wear protective goggles, dust mask, gloves, 

and sturdy shoes when working with this tool.

Ensure that the spot where you wish to work is free 

of 

power cables, gas lines or water pipes

 (e.g. 

by using a metal detector).
Do not touch the rotating tool!
Secure the workpiece against slipping, e.g. with the 

help of clamping devices.
Remove chips and similar material only when the 

machine is at a standstill.
Caution when carrying out hard screwdriving 

(driving of screws with either a metric or an imperial 

thread into steel)! The head of the screw may be 

ripped off or high restoring torques may occur on 

the handle.
High forces are released if the tool jams or catches. 

Always hold the machine with both hands by the 

intended handles, take a secure stance and 

concentrate on the work.
A damaged or cracked additional handle must be 

replaced. Never operate a machine with a defective 

additional handle.
LED light (11): do not observe the LED radiation 

directly with optical instruments.
Remove the battery pack from the machine before 

any adjustments, conversions or servicing are 

performed.

Protect battery packs from water and mois-

ture!

Do not expose battery packs to naked flame!

Do not use faulty or deformed battery packs!

Do not open battery packs!

Do not touch or short-circuit battery packs!

Slightly acidic, flammable fluid may leak from 

defective li-ion battery packs! 
If battery fluid leaks out and comes into 

contact with your skin, rinse immediately 

with plenty of water. If battery fluid leaks out 

and comes into contact with your eyes, wash them 

with clean water and seek medical attention imme-

diately.
If the machine is defective, remove the battery pack 

from the machine.

Transport of li-ion battery packs:

The shipping of li-ion battery pack is subject to laws 

related to the carriage of hazardous goods (UN 

3480 and UN 3481). Inform yourself of the currently 

valid specifications when shipping li-ion battery 

packs. If necessary, consult your freight forwarder. 

Certified packaging is available from Metabo. 
Only send the battery pack if the housing is intact 

and no fluid is leaking. Remove the battery pack 

from the machine for sending. Prevent the contacts 

from short-circuiting (e.g. by protecting them with 

adhesive tape).

Reducing dust exposure:

WARNING

 - Some dust created by power 

sanding, sawing, grinding, drilling, and other 

Original instructions

1. Declaration of Conformity

2. Specified Use

3. General safety instructions

4. Special Safety Instructions