Makita HR2300 - Инструкция по эксплуатации - Страница 7

7 

WARNING: 

• 

The vibration emission during actual use of the 
power tool can differ from the declared emission 
value depending on the ways in which the tool is 
used. 

• 

Be sure to identify safety measures to protect the 
operator that are based on an estimation of 
exposure in the actual conditions of use (taking 
account of all parts of the operating cycle such as 
the times when the tool is switched off and when it 
is running idle in addition to the trigger time). 
 

ENH101-15 

For European countries only 

EC Declaration of Conformity 

We Makita Corporation as the responsible 
manufacturer declare that the following Makita 
machine(s): 

Designation of Machine:   
Rotary Hammer 
Model No./ Type: HR2300, HR2310T, HR2600, HR2601 
are of series production and 

Conforms to the following European Directives: 

2006/42/EC 

And are manufactured in accordance with the following 
standards or standardised documents: 

EN60745 

The technical documentation is kept by our authorised 
representative in Europe who is:   

Makita International Europe Ltd. 
Michigan Drive, Tongwell, 
Milton Keynes, Bucks MK15 8JD, England 
 

13.7.2009 

000230 

Tomoyasu Kato 

Director 

Makita Corporation 

3-11-8, Sumiyoshi-cho, 

Anjo, Aichi, 446-8502, JAPAN 

ENH101-15 

For European countries only 

EC Declaration of Conformity 

We Makita Corporation as the responsible 
manufacturer declare that the following Makita 
machine(s): 

Designation of Machine:   
Combination Hammer 
Model No./ Type: HR2610, HR2610T, HR2611F, 
HR2611FT 
are of series production and 

Conforms to the following European Directives: 

2006/42/EC 

And are manufactured in accordance with the following 
standards or standardised documents: 

EN60745 

The technical documentation is kept by our authorised 
representative in Europe who is:   

Makita International Europe Ltd. 
Michigan Drive, Tongwell, 
Milton Keynes, Bucks MK15 8JD, England 
 

13.7.2009 

000230 

Tomoyasu Kato 

Director 

Makita Corporation 

3-11-8, Sumiyoshi-cho, 

Anjo, Aichi, 446-8502, JAPAN 

GEA010-1 

General Power Tool Safety 
Warnings 

WARNING Read all safety warnings and all 

instructions.

 Failure to follow the warnings and 

instructions may result in electric shock, fire and/or 
serious injury. 

Save all warnings and instructions for 
future reference. 

GEB007-7 

ROTARY HAMMER SAFETY 
WARNINGS 

1. 

Wear ear protectors.

 Exposure to noise can 

cause hearing loss. 

2. 

Use auxiliary handle(s), if supplied with the 
tool.

 Loss of control can cause personal injury. 

3. 

Hold power tool by insulated gripping 
surfaces, when performing an operation 
where the cutting accessory may contact 
hidden wiring or its own cord.

 Cutting 

accessory contacting a "live" wire may make 
exposed metal parts of the power tool "live" and 
could give the operator an electric shock. 

4. 

Wear a hard hat (safety helmet), safety glasses 
and/or face shield. Ordinary eye or sun 
glasses are NOT safety glasses. It is also 
highly recommended that you wear a dust 
mask and thickly padded gloves. 

5. 

Be sure the bit is secured in place before 
operation. 

6. 

Under normal operation, the tool is designed 
to produce vibration. The screws can come 
loose easily, causing a breakdown or accident. 
Check tightness of screws carefully before 
operation.