Bosch GBH 36 V LI Plus - Инструкция по эксплуатации - Страница 16

16

 | English 

1 609 92A 0JA | (22.6.15)

Bosch Power Tools



Use appropriate detectors to determine if utility lines 
are hidden in the work area or call the local utility com-
pany for assistance. 

Contact with electric lines can lead 

to fire and electric shock. Damaging a gas line can lead to 
explosion. Penetrating a water line causes property dam-
age.



When working with the machine, always hold it firmly 
with both hands and provide for a secure stance. 

The 

power tool is guided more secure with both hands.



Secure the workpiece. 

A workpiece clamped with clamp-

ing devices or in a vice is held more secure than by hand.



Always wait until the machine has come to a complete 
stop before placing it down. 

The tool insert can jam and 

lead to loss of control over the power tool.



Do not open the battery. 

Danger of short-circuiting.

Protect the battery against heat, e. g., against 
continuous intense sunlight, fire, water, and mois-
ture. 

Danger of explosion.



In case of damage and improper use of the battery, va-
pours may be emitted. Ventilate the area and seek 
medical help in case of complaints. 

The vapours can irri-

tate the respiratory system.



Use the battery only in conjunction with your Bosch 
power tool. 

This measure alone protects the battery 

against dangerous overload.



The battery can be damaged by pointed objects such as 
nails or screwdrivers or by force applied externally. 

An 

internal short circuit can occur and the battery can burn, 
smoke, explode or overheat.

Product Description and Specifica-
tions

Read all safety warnings and all instruc-
tions. 

Failure to follow the warnings and in-

structions may result in electric shock, fire 
and/or serious injury.

While reading the operating instructions, unfold the graphics 
page for the machine and leave it open.

Intended Use

The machine is intended for hammer drilling in concrete, 
brick and stone, as well as for light chiselling work. It is also 
suitable for drilling without impact in wood, metal, ceramic 
and plastic. Machines with electronic control and right/left ro-
tation are also suitable for screwdriving.

The light of this power tool is intended to illuminate the power 
tool’s direct area of working operation and is not suitable for 
household room illumination.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.

1

Quick change keyless chuck  (GBH 36 VF-LI Plus)

2

SDS-plus quick change chuck  (GBH 36 VF-LI Plus)

3

SDS-plus tool holder

4

Dust protection cap

5

Locking sleeve

6

Lock ring for rapid-change chuck  
(GBH 36 VF-LI Plus)

7

Vibration damper

8

Rotational direction switch

9

Handle (insulated gripping surface)

10

On/Off switch

11

Battery pack *

12

Release button for mode selector switch

13

Mode selector switch

14

Worklight

15

Button for depth stop adjustment

16

Auxiliary handle (insulated gripping surface)

17

Depth stop

18

Battery unlocking button

19

Temperature control indicator

20

Battery charge-control indicator

21

Button for charge-control indicator

22

Securing screw for key type drill chuck

(GBH 36 V-LI Plus) *

23

Key type drill chuck  (GBH 36 V-LI Plus) *

24

SDS-plus adapter shank for drill chuck
(GBH 36 V-LI Plus) *

25

Drill chuck mounting (GBH 36 VF-LI Plus)

26

Identification grooves

27

Chuck key (GBH 36 V-LI Plus)

28

Front sleeve of the quick change keyless chuck  
(GBH 36 VF-LI Plus)

29

Retaining ring of the quick change keyless chuck  
(GBH 36 VF-LI Plus)

30

EPC switch (Electronic Precision Control)

31

Universal bit holder with SDS-plus shank *

* Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories 
can be found in our accessories program.

Noise/Vibration Information

Sound emission values determined according to 
EN 60745-2-6.

Typically the A-weighted noise levels of the product are: 
Sound pressure level 90 dB(A); sound power level 
101 dB(A).  Uncertainty  K = 3 dB.

Wear hearing protection!

Vibration total values a

h

 (triax vector sum) and uncertainty K 

determined according to EN 60745-2-6: 
Hammer drilling into concrete: a

h

= 14.5 m/s

2

, K = 1.5 m/s

2

,

Chiselling: a

h

= 9.5 m/s

2

, K = 1.5 m/s

2

.

Drilling into metal: a

h

< 2.5 m/s

2

, K = 1.5 m/s

2

Screwdriving without impact: a

h

< 2.5 m/s

2

, K = 1.5 m/s

2

.

The vibration level given in this information sheet has been 
measured in accordance with a standardised test given in 
EN 60745 and may be used to compare one tool with anoth-

OBJ_BUCH-283-012.book  Page 16  Monday, June 22, 2015  10:28 AM