Bosch GBH 240 - Инструкция по эксплуатации - Страница 18

18

 | English 

1 609 92A 3SE | (24.4.17)

Bosch Power Tools

Working Advice



Before any work on the machine itself, pull the mains 

plug.



Hold the tool by the insulated gripping surfaces when 

performing operations where the application tool or 

the screw could contact hidden wiring or its own power 

cord. 

Contact with a “live” wire will also make exposed 

metal parts of the power tool “live” and shock the operator.

Changing the Chiselling Position (Vario-Lock)

The chisel can be locked in 36 positions. In this manner, the 
optimum working position can be set for each application.

– Insert the chisel into the tool holder.
– Turn the mode selector switch 

11

 to the “Vario-Lock” posi-

tion (see “Setting the operating mode”, page 17).

– Turn the tool holder to the desired chiselling position.
– Turn the mode selector switch 

11

 to the “chiselling” posi-

tion. The tool holder is now locked.

– For chiselling, set the rotation direction to right rotation.

Inserting Screwdriver Bits (see figure L)



Apply the power tool to the screw/nut only when it is 

switched off. 

Rotating tool inserts can slip off.

To work with screwdriver bits, a universal bit holder 

28

 with 

SDS-plus shank (accessory) is required.

– Clean the shank end of the adapter shank and apply a light 

coat of grease.

– Insert the universal bit holder with a turning motion into 

the tool holder until it automatically locks.

– Check the locking effect by pulling the universal bit holder.
– Insert a screwdriver bit into the universal bit holder. Use 

only screwdriver bits that match the screw head.

– To remove the universal bit holder, pull the locking sleeve 

5

 toward the rear and remove the universal bit holder 

28

out of the tool holder.

Maintenance and Service

Maintenance and Cleaning



Before any work on the machine itself, pull the mains 

plug.



For safe and proper working, always keep the machine 

and ventilation slots clean.



A damaged dust protection cap should be changed im-

mediately. We recommend having this carried out by 

an after-sales service.

– Clean the tool holder 

3

 each time after using.

If the replacement of the supply cord is necessary, this has to 
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.

After-sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare 
parts. Exploded views and information on spare parts can al-
so be found under:

www.bosch-pt.com

Bosch’s application service team will gladly answer questions 
concerning our products and their accessories.

In all correspondence and spare parts orders, please always 
include the 10-digit article number given on the nameplate of 
the product.

Great Britain

Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange 
the collection of a product in need of servicing or repair. 
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com

Ireland

Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888

Australia, New Zealand and Pacific Islands

Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045

Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570

Outside AU and NZ:
Phone: +61 3 95415555
www.bosch-pt.com.au
www.bosch-pt.co.nz

Republic of South Africa
Customer service

Hotline: (011) 6519600

Gauteng – BSC Service Centre

35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za

OBJ_BUCH-2460-003.book  Page 18  Monday, April 24, 2017  10:03 AM