Bort BHD-12Li-D - Инструкция по эксплуатации - Страница 9

9

energising power tools that have the switch on invites 
accidents .

•  Remove any adjusting key or wrench before turning the 

power tool on . A wrench or a key left attached to a rotat-
ing part of the power tool may result in personal injury .

•  Do not overreach . Keep proper footing and balance at 

all times . This enables better control of the power tool in 
unexpected situations .

•  Dress properly . Do not wear loose clothing or jewellery . 

Keep your hair, clothing and gloves away from mov-
ing parts . Loose clothes, jewellery or long hair can be 
caught in moving parts .

•  If devices are provided for the connection of dust ex-

traction and collection facilities, ensure these are con-
nected and properly used . Use of dust collection can 
reduce dust-related hazards .

POWER TOOL USE AND CARE

•  Do not force the power tool . Use the correct power tool 

for your application . The correct power tool will do the 
job better and safer at the rate for which it was designed .

•  Do not use the power tool if the switch does not turn 

it on and off . Any power tool that cannot be controlled 
with the switch is dangerous and must be repaired .

•  Disconnect the plug from the power source and/or the 

battery pack from the power tool before making any ad-
justments, changing accessories, or storing power tools . 
Such preventive safety measures reduce the risk of start-
ing the power tool accidentally .

•  Store idle power tools out of the reach of children and 

do not allow persons unfamiliar with the power tool 
or these instructions to operate the power tool . Power 
tools are dangerous in the hands of untrained users .

•  Maintain power tools . Check for misalignment or bind-

ing of moving parts, breakage of parts and any other 
condition that may affect the power tool’s operation . 
If damaged, have the power tool repaired before use . 
Many accidents are caused by poorly maintained power 
tools .

•  Keep cutting tools sharp and clean . Properly maintained 

cutting tools with sharp cutting edges are less likely to 
bind and are easier to control .

•  Use the power tool, accessories and tool bits etc . in ac-

cordance with these instructions, taking into account 
the working conditions and the work to be performed . 
Use of the power tool for operations different from 
those intended could result in a hazardous situation .

BATTERY TOOL USE AND CARE

•  Recharge only with the charger specified by the manu-

facturer . A charger that is suitable for one type of battery 
pack may create a risk of fire when used with another 
battery pack .

•  Use power tools only with specifically designated bat-

tery packs . Use of any other battery packs may create a 
risk of injury and fire .

•  When battery pack is not in use, keep it away from other 

metal objects, like paper clips, coins, keys, nails, screws 
or other small metal objects, that can make a connec-
tion from one terminal to another . Shorting the battery 
terminals together may cause burns or a fire .

•  Under abusive conditions, liquid may be ejected from 

the battery; avoid contact . If contact accidentally occurs, 
flush with water . If liquid contacts eyes, additionally seek 
medical help . Liquid ejected from the battery may cause 
irritation or burns .

SERVICE

Have your power tool serviced by a qualified repair person 
using only identical replacement parts . This will ensure 
that the safety of the power tool is maintained .

SAFETY WARNINGS FOR SCREWDRIVERS

•  Use auxiliary handle(s), if supplied with the tool . Loss of 

control can cause personal injury .

•  Hold power tool by insulated gripping surfaces, when 

performing an operation where the cutting accesso-
ry may contact hidden wiring or its own cord . Cutting 
accessory contacting a “live” wire may make exposed 
metal parts of the power tool “live” and could give the 
operator an electric shock .

•  Use suitable detectors to determine if utility lines are 

hidden in the work area or call the local utility company 
for assistance . Contact with electric lines can lead to fire 
and electric shock . Damaging a gas line can lead to ex-
plosion . Penetrating a water line causes property dam-
age or may cause an electric shock .

•  Switch off the power tool immediately when the tool 

insert jams . Be prepared for high reaction torque 
that can cause kickback . The tool insert jams when: 
– the power tool is subject to overload 
– it becomes wedged in the workpiece .

•  Hold the machine with a firm grip . High reaction torque 

can briefly occur while driving in and loosening screws .

•  When working with the machine, always hold it firmly 

with both hands and provide for a secure stance . The 
power tool is guided more secure with both hands .

•  Secure the workpiece . A workpiece clamped with 

clamping devices or in a vice is held more secure than 
by hand .

•  Do not open the battery . Danger of short-circuiting .
•  Protect the battery against heat, e . g ., against continu-

ous intense sunlight, fire, water, and moisture . Danger 
of explosion .

•  In case of damage and improper use of the battery, va-

pours may be emitted . Ventilate the area and seek med-
ical help in case of complaints . The vapours can irritate 
the respiratory system .

•  Use the battery only in conjunction with your power 

tool . This measure alone protects the battery against 
dangerous overload .

•  The battery can be damaged by pointed objects such as 

nails or screwdrivers or by force applied externally . An 
internal short circuit can occur and the battery can burn,