Bort BHD-12Li-D - Инструкция по эксплуатации - Страница 8

8

The term “power tool” in the warnings refers to your main-
soperated (corded) power tool or battery-operated (cord-
less) power tool .

WORK AREA SAFETY

•  Keep work area clean and well lit . Cluttered or dark areas 

invite accidents .

•  Do not operate power tools in explosive atmospheres, 

such as in the presence of flammable liquids, gases or 
dust . Power tools create sparks which may ignite the 
dust or fumes .

•  Keep children and bystanders away while operating a 

power tool . Distractions can cause you to lose control .

ELECTRICAL SAFETY

•  Power tool plugs must match the outlet . Never modify 

the plug in any way . Do not use any adapter plugs with 
earthed (grounded) power tools . Unmodified plugs and 
matching outlets will reduce risk of electric shock .

•  Avoid body contact with earthed or grounded surfac-

es, such as pipes, radiators, ranges and refrigerators . 
There is an increased risk of electric shock if your body is 
earthed or grounded .

•  Do not expose power tools to rain or wet conditions . 

Water entering a power tool will increase the risk of 
electric shock .

•  Do not abuse the cord . Never use the cord for carrying, 

pulling or unplugging the power tool . Keep cord away 
from heat, oil, sharp edges and moving parts . Damaged 
or entangled cords increase the risk of electric shock .

•  When operating a power tool outdoors, use an extension 

cord suitable for outdoor use . Use of a cord suitable for 
outdoor use reduces the risk of electric shock .

•  If operating a power tool in a damp location is unavoid-

able, use a residual current device (RCD) protected sup-
ply . Use of an RCD reduces the risk of electric shock .

PERSONAL SAFETY

•  Stay alert, watch what you are doing and use common 

sense when operating a power tool . Do not use a power 
tool while you are tired or under the influence of drugs, 
alcohol or medication . A moment of inattention while 
operating power tools may result in serious personal 
injury .

•  Use personal protective equipment . Always wear eye 

protection . Protective equipment such as dust mask, 
non-skid safety shoes, hard hat, or hearing protection 
used for appropriate conditions will reduce personal 
injuries .

•  Prevent unintentional starting . Ensure the switch is in 

the off-position before connecting to power source 
and/or battery pack, picking up or carrying the tool . 
Carrying power tools with your finger on the switch or 

ENGLISH

GB

Cordless rotary hammer

INTENDED USE

This tool is intended for hammer drilling in concrete, brick 
and stone; for drilling in wood, metal and plastic as well 
as for screwdriving (specifi c accessories should be used) .
The hammering system in this tool outperforms any tradi- 
tional ratcheting drill when drilling in concrete .
This tool is designed for use in combination with all stand-
ard SDS+ accessories

TECHNICAL SPECIFICATIONS (FIG. 1)

Voltage / Energy intensity

12 V / 2 Ah

Idle speed

0 - 900 min

-1

Impact frequency

0 - 4800 min

-1

Impact energy

1 .2 J

Chuck type

SDS +

Drilling hole diameter in concrete

10 mm

Drilling hole diameter in wood

13 mm

Drilling hole diameter in metal

+

Drilling mode

+

Chiseling mode

+

Impact drilling mode

+

Illumination of the working area

+

Weight

1 .2 kg

PRODUCT ELEMENTS (FIG. 2)

1 .  On/Off switch;
2 .  Switch for changing direction of rotation;
3 .  Switch for selecting operating mode;
4 .  Locking sleeve .

THE COMPLETE SET INCLUDES:

1 .  Fast charger;
2 .  Additional battery pack .

GENERAL POWER TOOL SAFETY WARNINGS

Read all safety warnings and all instructions.

Failure to follow the warnings and instructions may result 
in electric shock, fire and/or serious injury .
Save all warnings and instructions for future reference .