Smeg ALFA1035EH - Инструкция по эксплуатации - Страница 20

Use

66

2. Use the 

 and 

 buttons to select a 

cooking function (the available functions 
are “

Convection

”, “

Delayed start

” and 

“

Hold warm

”).

3. Press the 

 button to confirm.

From here onwards, the procedure for 
setting the Convection function parameters 
(required and optional) is the same as that 
for manual cooking.
Once the parameters have been set for the 

first step, press the 

 button to confirm 

them and return to the step setting screen, 
from which it is possible to add additional 
cooking steps.
•  “

Step setting

” now appears on the 

alphanumeric display.

•  Use the 

 button to add a step, “

Step 2

” 

will appear on the alphanumeric display.

•  Press the 

 button to configure the 

new step that has just been added.

•  Use the 

 button to go back to the 

previously set steps.

•  Use the 

 button to change a step that 

has already been configured following 
the procedure described.

If the last step has not been set, at least for 
the required parameters, it will be ignored.
When at least 2 steps have been set, in the 

step setting screen, the 

 and 

buttons can be used to scroll through the 
steps that have been set.

Once the steps have been set, press 

 to 

start cooking. During cooking, the figure on 

the left in the 

 icon, indicates the 

number of the current step and the number 
on the right indicates the number of steps 
set. The countdown for the total time of all 
the steps appears on the time display, apart 
for the hold step, if set.

At the end of step cooking

•  5 Beeps are emitted.
•  “

Baking end

” appears on the display.

•  “

00:00

” appears on the time display.

•  Use the 

 button to save the cooking 

sequence in an automatic program (see 
“Cooking with a recipe”).

•  Once the “

Hold

” step has been 

set, it will not be possible to add 
additional cooking steps.

•  If the 

Hold

 function has been 

selected as the last step, the time 
display shows the countdown for 
the total time of all the steps 
apart from the hold step.

Each time a step is added, the time 
display indicates the total duration 
for all steps that have been set.

•  The steps that have been set can 

only be changed, they cannot 
be deleted.

•  It is not possible to set an infinite 

duration “

--:--

” for a step, apart 

for the hold function.