Пароварки Philips Avent SCF883/01, 4 в 1 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
21
ENGLISH
1
Unplug the appliance and remove the jar from the main unit (Fig.
~
).
2
Push the lid tab counterclockwise to release the jar lid from the jar (Fig.
h
).
3
Grab the protrusion on the sieve and pull one side of the sieve out first, and
then release the sieve from the jar lid (Fig.
).
4
Dissemble the sealing ring from the jar lid for cleaning when necessary.
5
Remove the blade unit (Fig.
w
).
6
Thoroughly clean the blade unit under the tap immediately after use. Make
sure you also rinse the inside of the blade unit tube (Fig.
€
).
Caution
•
Handle the blade unit very carefully. The cutting edges are very sharp.
7
Turn the water tank lid counterclockwise and remove it from the water tank
(Fig.
).
8
Wash the water tank lid under the tap.
9
Pour out any excess water in the tank. If necessary, pour fresh water into the
water tank (Fig.
e
) and flush it out (Fig.
‚
). Repeat as necessary until the
water tank is clean.
10
Clean all other parts that come into contact with food in hot water with
detergent immediately after use.
11
Dry the main unit and all parts after washing.
Descaling the water tank
For optimum performance, we recommend descaling the appliance every 4 weeks.
To reduce the build up of limescale, we recommend using soft or purified water for
steaming, reheating or defrosting.
To descale the appliance, follow the descaling instructions below.
1
Make sure the appliance is switched off.
2
Mix 80 ml of white vinegar (6% acetic acid) with 80 ml of water, or you can
use citric acid with warm water to descale the water tank.
3
Add the solution to the boiler in the water tank.
4
Put the water tank lid on the water tank and turn the lid clockwise to lock it
securely in place.
5
Wait for 6 hours/overnight or until all limescale has dissolved.
6
Pour the used solution out of the water tank (Fig.
‚
).
7
If the limescale buildup has not completely dissolved, repeat the descaling
cycle from step 1 to 6 in this chapter.
8
Pour some fresh water into the water tank (Fig.
e
) and flush it out (Fig.
‚
).
Repeat as necessary until the water tank is clean.
9
Rinse the water tank lid thoroughly under the tap.
10
Fill the water tank with 200 ml of water and let the appliance complete a
20-minute steaming cycle with the empty jar before you use the appliance
with food again.
