Philips FastCare Compact GC6742/20 - Инструкция по эксплуатации - Страница 7

9

Cleaning the soleplate

To properly maintain your appliance, clean it regularly.

1 

Clean the appliance with a moist cloth.

2 

To easily and effectively remove stains, let the soleplate heat up and move the iron over a moist cloth 

(Fig. 20).

Tip: Clean the soleplate regularly to ensure smooth gliding.

Storage

1 

Switch off the appliance and unplug it.

2 

Pour the water out of the water tank into the sink (Fig. 21).

3 

Fold the mains cord and water supply hose together. Push them into the storage compartment (Fig. 22).

4 

For GC6730, GC6740 series only: push the carry lock release button to lock the iron onto the iron 

platform (Fig. 23). You can carry the appliance by the handle of the iron when it is locked onto the iron 

platform (Fig. 24).

Troubleshooting

This chapter summarizes the most common problems you could encounter with the appliance. If you are 

unable to solve the problem with the information below, visit

 www.philips.com/support 

for a list of 

frequently asked questions or contact the Consumer Care Center in your country.

Problem

Possible cause

Solution

The iron does not produce 

any steam.

There is not enough water in 

the water tank.

Fill the water tank beyond the MIN 

indication. Press and hold the steam trigger 

until steam comes out. It may take up to 30 

seconds until steam comes out.

You did not press the steam 

trigger.

Press and hold the steam trigger until 

steam comes out.

The steam function has 

been disabled until you have 

performed the Calc-Clean 

process.

Perform the Calc-Clean process to restore 

the steam function. (see chapter ' Cleaning 

and maintenance')

At the start of your ironing 

session, the steam trigger has 

not been pressed long enough.

Press and hold the steam trigger until 

steam comes out. It may take up to 30 

seconds until steam comes out.

You have set the temperature 

dial to 

●

.

Steam is not available at 

●

. To use the 

steam, set the temperature dial to 

●●

 or 

higher.

The light of the CALC-

CLEAN button flashes and 

the appliance beeps.

This is the Calc-Clean reminder. Perform the Calc-Clean after the Calc-Clean 

reminder is given (see chapter ‘Cleaning 

and maintenance’).

No steam comes out of 

the soleplate, the light of 

the CALC-CLEAN button 

flashes and the appliance 

beeps.

You have not done or have 

not completed the Calc-Clean 

process.

Perform the Calc-Clean process to enable 

the steam function again (see chapter 

‘Cleaning and maintenance’).

English