Braun IS7155WH - Инструкция по эксплуатации - Страница 14

14

10 minutes of dry ironing, the iron switches to the 
auto-off  mode.

Vertical steam

The iron can also be used for steaming hanging 
clothes (B). Hold the iron in a vertical position, tilted 
slightly forwards. Press repeatedly the steam button 
(12) or the precision shot button (13) while moving 
the iron from top to the bottom.

Steam is very hot:

 never iron or dampen garment 

while wearing them.

3D soleplate 

The unique round shape of the 3D soleplate 
ensures best gliding results on diffi

  cult parts (e. g. 

buttons, pockets etc.)

Settings

CareStyle 7143, 7144

The iCare setting 

 is automatically chosen 

when the appliance is switched on for the fi rst time. 
From 2nd switch on, it will be set to the last setting 
chosen.
The iCare setting is suggested for garments like 
wool, polyester and cotton/linen.

The eco setting 

eco

 is suggested for most delicate 

garments like synthetics, silk and blended fabrics 
for which you need less steam. This setting allows 
less power consumption.

CareStyle 7155, 7156

eco 

eco

It is suggested for most delicate garments like 
synthetics, silk and blended fabrics. This setting 
allows less power consumption.

iCare 

It is suggested for garments like wool, polyester 
and cotton.

turbo 

It is suggested for garments that need more 
powerful steam, like thick cotton/linen and jeans.
This setting can also be used to refresh and 
hygienize garments that were in the closet before 
dressing.

Note:

 Do not use the hygienize function on people 

and pets.
When the appliance is switched on, it will always be 
set to the iCare setting, independently on the last 
setting chosen.

For best results 

Before start ironing follow the garment care label 
instructions carefully.

•

Always iron black and dark garments inside out 
to avoid getting a sheen on the fabrics from the 
iron. 

•

When ironing a shirt, start with the more diffi

  cult 

parts like collar, cuff  links and sleeves. Then iron 
the bigger parts like front and back, so you can  
prevent wrinkling the bigger parts when you are 
ironing the other parts.

•

When you iron a collar, start on its underside and 
work from the outside (the pointy end) inwards. 
Turn over and repeat. Fold down the collar and 
press the edge for a more crisp fi nish.

•

When ironing garments with imprints, 
applications or even more sensitive fabric parts 
(i.e. embroidery), turn them inside out and, if 
necessary, lay a cotton cloth between the iron 
and the fabric. This way you avoid damage and 
get the volume of fabric designs that are not to 
be ironed fl at.

•

When ironing woolen garments, we recommend 
pressing sequentially the precision shot button 
(13) without placing the iron on the garment. This 
will avoid shiny eff ects on the fabric.

•

In order to prevent new creases while ironing 
with steam make sure that the garment shows no 
residual moisture before going on ironing other 
parts of it. 

(C) Precision shot 

•

Press the precision shot button (13) completely 
down.

•

Steam will come out of the tip area of the 
soleplate only.

•

To stop this function release the button.

•

If you do not press it down completely, some 
steam may also come out from the rear steam 
holes in the soleplate.

(D) Iron auto-off

This function is activated if after 10 minutes there 
has been no steam emission.

•

When the iron is in the auto-off  mode, the icon

 is fl ashing and the temperature control LED 

(11) is off . The iron will turn off  to reduce power 
consumption.

•

To turn the iron on again, the On/Off  button (2) 
has to be pressed. Before start ironing again 
wait until the temperature control LED and the 
related icon for the setting in the display (1) are 
permanently on.

5712811931_CareStyle_7143_7144_7155_7156_INT_S6-152.indd   14

5712811931_CareStyle_7143_7144_7155_7156_INT_S6-152.indd   14

27.10.17   08:22

27.10.17   08:22