Braun IS7155WH - Инструкция по эксплуатации - Страница 13

13

•

Important: 
Keep all packaging (plastic bags, 
polystyrene foam) away from children.

Description

Steam Generator Iron

1  Display
2  On/Off  button 
3  Calc clean system button
4  Settings (eco, iCare, turbo)
5  Iron rest
6  Water tank
7  Power cord
8  Closure 
9  Transparent cover
10 Lock system

Iron

11 Temperature control LED
12 Steam button
13 Precision shot button
14 Double cord
15 Heel rest

Intended use

The appliance must be used only for ironing 
garments which are suitable for ironing according to 
the care label. In addition the appliance can be used 
for refreshing. Never iron or dampen garments 
while wearing them. 

Before fi rst use

Take the unit out of the carton. Remove all pieces of 
the packing. Remove any possibly extant labels on 
the unit (do not remove the rating plate).

When steam is ready for the fi rst time we 
recommend to iron for a few minutes over a rag 
to avoid manufacturing residues can dirty your 
garments.

(A) Filling the water tank

•

Make sure that the appliance is switched off  and 
the system is unplugged.

•

Remove the water tank (6).

•

Fill the water tank with tap water, taking care 
not to exceed the “max” level but at least up 
to the mark “min” otherwise the appliance will 
not be ready to start steam ironing. If you have 
extremely hard water, we recommend that 
you use a mixture of 50 % tap water and 50 % 
distilled water.

•

Never use distilled water exclusively. Do not 
add any additives (e.g. starch). Do not use 
condensation water from a tumble dryer.

•

Insert the water tank.

•

Place the appliance on a stable, level surface.

Note:

 If you use fi ltering devices or in-house 

permanent descaler, make absolutely sure the 
water obtained is neutral ph.

Water reserve function 

•

When the water level is becoming low, the icon 

 starts fl ashing. At this stage it is possible to 

continue steam ironing for about 10-15 minutes.

•

When the icon   turns permanently on, it 
becomes necessary to refi ll the tank. At the same 
time, the temperature control LED (11) is fl ashing 
and the icon related to the selected setting (4) 
turns off .

•

To continue steam ironing, refi ll the water tank (A).

(B) Start into operation 

Before start ironing follow the garment care label 
instructions carefully. Fabrics with this symbol 

are not ironable.

•

Place the iron on the iron rest (5) or on its heel 
rest (15), unwind completely the cord, plug in the 
appliance and press the On/ Off  button (2).

•

Select the setting (4) most suitable for the 
garments to be ironed.

•

The requested setting can be chosen by pressing 
the corresponding button (eco, iCare or turbo). 
To switch from one setting to another press the 
dedicated button. 

•

The iron will start to heat up and the temperature 
control LED (11) on the iron will fl ash. Once the 
temperature is reached, the temperature control 
LED is permanently on.

•

The related icon for the setting in the display (1) 
will start to fl ash. When steam is ready the icon 
turns permanently on.

Steam ironing 

Press the steam button (12) or the precision shot 
button (13).

Double trigger 

Press the steam button (12) or the precision shot 
button (13) twice in quick succession within 1 second. 
There will be a continuous steam emission for a few 
seconds. 
Press the steam button or the precision shot button 
once again during steam emission to stop the 
function. 

Dry ironing 

Iron without pressing the steam button (12) or the 
precision shot button (13). Please note that after 

5712811931_CareStyle_7143_7144_7155_7156_INT_S6-152.indd   13

5712811931_CareStyle_7143_7144_7155_7156_INT_S6-152.indd   13

27.10.17   08:22

27.10.17   08:22