Braun IS2058BK - Инструкция по эксплуатации - Страница 13

13

Before fi rst use

When you use the appliance for the fi rst time, press 
the steam button (2) for about 60 seconds and hold 
the iron horizontally to pull the steam through to the 
soleplate. 

When steam is ready for the fi rst time we 
recommend to iron for a few minutes over a rag 
to avoid manufacturing residues can dirty your 
garments.

(B) Start into operation 

Before start ironing follow the garment care label 
instructions carefully. Fabrics with this symbol 

are not ironable.

•

Place the iron on the iron rest (4), unwind 
completely the power cord and plug in. 

•

The iron will start to heat up and the temperature 
control LED (1) on the iron will fl ash. Once the 
iron is ready the temperature control LED is 
permanently on.

•

For ironing with steam, press the steam button (2) 
below the iron handle. Steam will come out from 
the holes in the soleplate. 

•

For dry ironing, iron without pressing the steam 
button. Please note that after 10 minutes of dry 
ironing, the iron switches to the auto-off  mode.

For best results 

•

Always iron black and dark garments inside out to 
avoid getting a sheen on the fabrics from the iron. 

•

When ironing a shirt, start with the more diffi

  cult 

parts like collar, cuff  links and sleeves. Then iron 
the bigger parts like front and back, so you can 
prevent wrinkling the bigger parts when you are 
ironing the other parts.

•

When you iron a collar, start on its underside and 
work from the outside (the pointy end) inwards. 
Turn over and repeat. Fold down the collar and 
press the edge for a more crisp fi nish.

•

When ironing garments with imprints, 
applications or even more sensitive fabric parts 
(i.e. embroidery), turn them inside out and, if 
necessary, lay a cotton cloth between the iron and 
the fabric. This way you avoid damage and get the 
volume of fabric designs that are not to be ironed 
fl at.

•

In order to prevent new creases while ironing 
with steam make sure that the garment shows no 
residual moisture before going on ironing other 
parts of it. 

(C) Settings

 iCare 

The iCare mode is automatically chosen when the 

appliance is plugged in. The iCare mode indicator 
(11) is on. 
This mode is suggested for garments like wool, 
polyester and cotton/linen.

eco 

The eco mode is suggested for most delicate 
garments like synthetics, silk and blended fabrics 
for which you need less steam. This mode allows 
less power consumption.
To select the eco mode, press the mode button 
(12). The eco mode indicator (10) turns on. 

 turbo

The turbo mode is suggested for garments that 
need more powerful steam, like thick cotton/linen 
and jeans.
To select the turbo mode, hold down the mode 
button (12) until the eco mode indicator (10) and 
the iCare mode indicator (11) turn on. 

Double trigger (turbo mode only) 

Use the double trigger function to remove stubborn 
creases. 

Press the steam button (2) twice quickly. There will 
be a continuous steam emission for a few seconds. 
Press the steam button once again during steam 
emission to stop the function.

To repeat the steam boost wait about 12 
seconds before pressing again the steam button. 

Vertical steam (iCare mode only)

The iron can also be used for steaming hanging 
clothes for a quick refreshment. However, this 
function does not replace ironing.

Ensure the iCare mode is selected and hold the iron 
in a vertical position, tilted slightly forwards. 

Press repeatedly the steam button (2) while moving 
the iron from top to the bottom. Then place the iron 
on the iron rest. 

Steam is very hot:

 never iron or dampen garment 

while wearing them.

3D soleplate 

The unique round shape of the 3D soleplate 
ensures best gliding results on diffi

  cult parts (e. g. 

buttons, pockets etc.)

(D) Auto-off 

This function is activated if after 10 minutes there 
has been no steam emission.

•

When the appliance is in the auto-off  mode the 
temperature control LED (1) is fl ashing in a faster 
interval.

•

To turn the iron on again press the reset button 
(14), the mode button (12) or the steam button 
(2).

5712812131_CareStyle_1_INT_S6-130.indd   13

5712812131_CareStyle_1_INT_S6-130.indd   13

28.08.18   14:09

28.08.18   14:09