Bosch TDS6040 - Инструкция по эксплуатации - Страница 19

19

B O S C H

ENGLISH

* Model dependent

Descaling the limescale collector *

 1 

  Place the limescale collector under the water tap. 

 2 

  Wash it up until limescale residues are removed. 

Descaling the iron

 1 

  Fill the tank (9) with tap water.

 2 

  Plug in the mains cable (6) and press the button (1) to 

switch the appliance on.

 3 

  Press the descaling button (2) for 2 seconds. Its 

indicator light will remain permanently lit.

 4 

  Wait until the indicator light (1) stops lashing and 

remains lit permanently. Two beeps will be heard.

 5 

  Hold the iron in a horizontal position over an empty 

sink to collect the water. 

If your appliance is equipped with a “Calc'nClean” 

container (17*), place the iron on it.

Warning: the container must only be used to 
per form the descaling process. It must not be 
used as a stand for the iron while ironing.

 6 

  Press the steam release button (14) for 2 seconds. The 

descaling process will start automatically. 

Warning: 

boiling water and steam will be released through 
the soleplate, carr ying limescale and/or deposits 
that may be inside. 

During the process, a beep will 

be heard every 5 seconds.

 7 

  After approximately 3 minutes, the iron will stop 

releasing steam. A long beep will be heard, indicating 

that descaling process has inished. The appliance will 

switch off automatically.

 8 

  To clean the soleplate (16), immediately rub off any 

residue by running the hot iron over a wet cotton cloth.

2”

2x

2”

5”