Bosch TDS6040 - Инструкция по эксплуатации - Страница 18

18

B O S C H

ENGLISH

* Model dependent

5. Auto switch off

For your safety and to save energy, the appliance switches 

off automatically when it has not been used for 8 minutes.  

Three beeps will be heard, and all indicator lights (1, 2, 3, 

4) will lash.

1

  To switch the steam station back on, press the steam 

release button (14) again. 

Cleaning & Maintenance

1. Descaling process

Important: to keep your appliance in good condition 
for a long time, you should carr y out the descaling 
process after a period of use. The “Calc'nClean” 

indicator light (2) will lash and three beeps will be 

heard, indicating that the process should be 
per formed. You may continue ironing, but before the 
next use, while the appliance is cold, a descaling 
process should be per formed.

Descaling the boiler

 1 

  Take special care to ensure that the appliance is cold 

and unplugged.

 2 

  Empty the water tank.

 3 

  Remove the iron from the pad (12).

 4 

  Unscrew and remove the boiler cap (8) and take it out. 

Empty the boiler completely.

 5 

  Fill the boiler with approximately 300 ml of tap water.  

  Close the boiler cap and shake the base unit for a few 

moments. Then, empty it completely. 

Important:

 To obtain the best result, we recommend 

that this operation be performed twice.  

Before re-closing, make sure no water remains in the 

boiler.

 6 

  If your appliance is equipped with scale collector 

(8*), it must be washed (see the “Descaling the scale 

collector” section).

 7 

  Replace and tighten up the cap.

3x

3x

300 ml