Bosch TDS2110 - Инструкция по эксплуатации - Страница 25

25

B O S C H

ENGLISH

* Model dependent

Trouble shooting

Problem

Possible causes

Solution

The iron begins 

to smoke when 

switched on.

1.  During first use: certain 

components on the 

appliance have been lightly 

greased at the factory and 

may produce a  small 

amount of smoke when 

initially heated.

1.  This is completely normal 

and will stop after a short 

while.

The iron does not

produce any 

steam.

1.  During first use, water has 

not filled the hose (8) 

completely.

2.  The “Calc'nClean” indicator 

light (6) will flash. The 

descaling process has not 

been completed. 

1.  Press and hold  the steam 

release button (17) pressed 

until steam comes out.

2.  Perform a cleaning cycle 

(see the “Descaling process" 

section).

Dirt comes out 

through the 

soleplate.

1.  There is a build up of 

limescale or minerals in the 

iron.

2.  Chemical products or 

additives have been used.

1.  Carry out a cleaning cycle 

(see the “Descaling process" 

section).

2.  Never add products to the 

water (see the “Filling the 

water tank” section).

  Clean the soleplate with a 

damp cloth.

The 

“Calc'nClean” 

indicator light (6) 

does not turn off.

1.  The iron descaling process 

has been stopped before 

being completed.

1.  Restart and complete the 

iron descaling process.

The appliance 

makes a pumping 

sound.

1.  Water is being pumped into 

the iron.

2.  The water tank is empty.

1.  This is normal.

2.  Fill the water tank.

The iron drips.

1.  Ironing programme selection 

knob (16) is in “i-Temp” 

mode and the “high steam” 

indicator light (2) lights up 

permanently.

1.  When you iron in “i-Temp” 

mode, press “Set” button (1) 

until the “medium steam” 

indicator light (3) lights up. 

(See the "ironing 

programmes" section).

The iron 

produces little 

steam.

1.  The iron has been switched 

on recently.

1.  It is normal, the iron  

produces steam gradually 

until it is stabilized.

If the above tips do not solve the problem, get in touch 

with our customer service.

You can download this manual from the Bosch local 

homepages.