Bosch TDS2110 - Инструкция по эксплуатации - Страница 22

22

B O S C H

ENGLISH

* Model dependent

Cleaning & Maintenance

1. Descaling process

This appliance is equipped with an automatic clean 

warning indicator, which indicates that scale 

particles must be removed from inside the steam 

chamber.

When activated, three beeps will be heard, and the 

“Calc'nClean” indicator light (7) will flash indicating 

that the process should be performed.

You may continue ironing for a time. Once this time 

has passed, you will only be able to dry iron (without 

steam). 

To start steam ironing again, follow this descaling 

process:

 1 

  Fill the tank (11) with tap water.

 2 

  Plug in the mains cable (9) and press "on/off" button 

(5) to switch the appliance on.

 3 

  Press the descaling button (6) for 2 seconds. 

The “Calc'nClean” indicator light (7) will remain 

permanently lit and a beep will be heard.

 4 

Wait until one of the indicator lights (2,3,4) stops 

flashing and remains lit permanently. Two beeps will 

be heard.

 5 

  Place the iron on the "Calc'nClean" container (19).

Make sure that the surface on which the container is 

placed is stable.

Warnings: 

•  Do not remove the iron from the container until 

the process has finished. Boiling water and steam 

will be released through the soleplate, removing 

limescale and/or deposits that may be inside.

•  The container must only be used the to perform the 

descaling process. It must not be used as a stand 

for the iron while ironing.

3x

2x

2”

1

2”

min

min