Seagate (ST8000VN004) - Инструкция по эксплуатации - Страница 18

Seagate IronWolf SATA Product Manual, Rev. B

  17

2.12

Agency and Safety Certifications

Each Hard Drive and Solid State Drive ("drives") has a product label that includes certifications that are applicable to that specific 
drive. The following information provides an overview of requirements that may be applicable to the drive.

2.12.1 Safety certification

The drives are recognized in accordance with UL/cUL 60950-1 and EN 60950-1.

The security features of Self-Encrypting Drive models are based on the “TCG Storage Architecture Core Specification” and the “TCG

Storage Workgroup Security Subsystem Class: Enterprise_A” specification with additional vendor-unique features as noted in this 
product manual.

2.12.2 Regulatory Models

The following regulatory model number represent all features and configurations within the series:

Regulatory Model Numbers: STL010

2.12.3 European Union (EU) CE Marking Requirements

Drives that display the CE mark comply with the European Union (EU) requirements specified in the Electromagnetic Compatibility 
Directive (2014/30/EU) put into force on 20 April 2016. Testing is performed to the levels specified by the product standards for 
Information Technology Equipment (ITE). Emission levels are defined by EN 55032:2012, Class B and the immunity levels are defined 
by EN 55024:2010.

The drives also meet the requirements of The Low Voltage Directive (LVD) 2014/35/EU.

Seagate drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with all relevant 
regulatory requirements and standards for the drives, Seagate cannot guarantee that all system-level products into which the drives 
are installed comply with all regulatory requirements and standards applicable to the system-level products. The drive is designed 
for operation inside a properly designed system (e.g., enclosure designed for the drive), with properly shielded I/O cable (if 
necessary) and terminators on all unused I/O ports. Computer manufacturers and system integrators should confirm EMC 
compliance and provide CE marking for the system-level products.

For compliance with the RoHS "Recast" Directive 2011/65/EU (RoHS 2), 

See Section 2.13.1 on page 19 

.

2.12.4 Australian RCM Compliance Mark

If these models have the RCM marking, they comply with the Australia/New Zealand Standard AS/NZ CISPR32 and meet the 
Electromagnetic Compatibility (EMC) Framework requirements of the Australian Communication and Media Authority (ACMA).

2.12.5 Canada ICES-003

If this model has the ICES-003:2016 marking it complies with requirements of ICES tested per ANSI C63.4-2014.