Cooper&Hunter CH-D014WD2-30LD - Инструкция по эксплуатации - Страница 18

Bad dehumidifying
performance

● Check whether there is

any obstacle around the

unit.

● Make sure there is no curtain,

shutter or furniture that blocks

   blocked.

● Doors and windows

 are

left open.

● Make sure all doors and

windows and other opening to

the outside have been

closed.

● Room temperature

is too

low.

●

W

arm temperature is good for

   ature will reduce unit's working 

   ef

fect.

This unit should be wor-

   king in a place where temper-

   ature is above 5°C.

Problem

Possible Causes

Solution

Power indicator is 

not lit when power 

is connected.

● Power is not supplied for

   power plug is not well

   inserted.

● Check if power is lost. If yes,

wait for the power to restore.

● If not, check whether the

power circuit or power socket

has been damaged.

● Check whether power plug is

loosen.

● Check whether power cord is

damaged.

● Fuse is blown.

● Replace the fuse.

Bucket full indicator

is lit up.

● Bucket is not properly

placed.

●

W

ater is full in the bucket.

●

Buc

k

e

t 

ha

s

 been remo

v

ed

.

●

Emp

t

y

 t

he buc

k

e

t 

and rep

l

ace

it.

Unit can function

normally but it can

 not start up.

● Humidity is set too high.

● If you want the air drie

r

,

press - button to lower the

14

or press the - pad until

the screen reads CO for unit to 

dehumidify continuously.