Philips AMF220/15 - Инструкция по эксплуатации - Страница 7

3

EN

English

2  Getting started

Installing the filter

Note: 

Make sure the appliance is unplugged from the electrical outlet before installing the filter.

1 

To remove the back cover, hold the side of it with both hands and pull (fig 

d

)�

2 

Pull the filter from the appliance (fig 

e

)�

3 

Remove all packaging materials from the filter (fig 

f

)�

4 

Put the filter back into the appliance (fig 

g

)�

5 

Reattach the back cover (fig 

h

)�

Setting up the remote control

1 

Pull out the plastic film on the remote control to activate the battery (fig 

i

)�

2 

Pair the remote control with the appliance if you have multiple devices in one house

(see the chapter “Pairing your remote control”).

Note: 

Place the remote control in the slot and it snaps in place automatically (fig 

j

)�

3  Using the 3-in-1: air purifier, fan and heater

Air quality light

PM2.5 level

Air quality light color

Air quality level

≤ 12

Blue

Good

13-35

Blue-purple

Fair

36-55

Purple-red

Poor

> 55

Red

Very poor

Turning on and off

Note: 

• 

Plug the appliance into the power outlet; do not use a power strip.

• 

If the appliance is running in heating mode when you turn it off, it continues working for 20 seconds 

to exhaust the remaining heat. Counting down will show on the display panel.

1 

Press 

 to switch on the appliance.

2 

The display panel lights up, and appliance shows the PM2.5 level and temperature (fig 

k

)�

3 

Press 

 to switch off the appliance.