Philips AMF220/15 - Инструкция по эксплуатации - Страница 10

6

EN

Before the filter replacement alert lights up

You can replace the filter before the filter replacement alert (   ) lights up. If you do this, you need to 

reset the filter lifetime counter manually.

1 

Unplug the appliance from the power outlet and wait 10 seconds.

2 

Plug the appliance into the power outlet (fig 

z

)�

3 

Within 15 seconds after power on, press and hold the    button for 3 seconds to reset the filter 

lifetime counter.

»

The filter replacement alert 

blinks once after successfully resetting the filter.

5  Troubleshooting

This chapter summarizes the most common problems you could encounter with the appliance. If you 

are unable to solve the problem with the information below, contact the Consumer Care Center in your 

country�

Problem

Possible solution

The airflow from the air 

outlet is significantly 

weaker than before.

• 

The surface of the filter is dirty. Clean the surface of the filter (see the 

chapter “Cleaning and maintenance”).

The air quality does not 

improve even though 

the appliance has been 

operating for a long 

time.

• 

Check whether the packing material is removed from the filter.

• 

Check whether the filter is installed in the appliance.

• 

Clean the sensor cover surface with mop or vacuum cleanser;

Do not open sensor cover or touch inside. 

• 

Room size is too large, or the outdoor air quality is poor. 

For optimum purification performance, close the doors and windows 

when operating the appliance.

• 

There are indoor pollution sources. Examples include cigarette smoke, 

cooking fumes, incense, perfume and alcohol.

• 

Filter has reached end of life. Replace the filter with a new one.

The appliance produces 

a strange smell.

• 

The first few times you use the appliance, it may produce a plastic smell. 

This is normal. 

• 

If the appliance produces a burning smell, immediately unplug it and 

turn it upside down to check whether any foreign objects have fallen into 

the appliance. If nothing is found, please contact your Philips dealer or an 

authorized Philips service center.

• 

The filter may produce an odor after being used for a while because of 

the absorption of indoor gases. It’s recommended that you reactivate the 

filter by putting it in direct sunlight for repeated use. If the odor remains, 

replace the filter.