Vitek VT-2173 - Инструкция по эксплуатации - Страница 6

Обогреватели Vitek VT-2173 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 48
Загружаем инструкцию
background image

6

 ENGLISH

Open the battery compartment lid, turn to 
the direction of the OPEN arrow and insert 
a CR 2032, 3V, following the polarity. Close 
the battery compartment lid, turning it to in 
the direction of the CLOSE arrow.

Usage of the remote control

Functions of the buttons on the remote 
control fully correspond to the buttons on 
the control panel. 
Each pressing of the button is accompa-
nied by a sound signal.  
While using the remote control direct it to 
the detector situated in the middle of the 
indication panel (3). The distance between 
the remote control and the unit should not 
exceed 5-6 meters.

CLEAN AND CARE

Note! Always switch off and unplug the 
unit before cleaning.

Clean the cell evaporator (10), filters (11) 
and (12) as soon as they are dirty
1. Unplug the unit.
2.  Remove the grid with the mesh filter (12), 

by pressing the clamps. To clean the grid 
with filers (12) use a vacuum cleaner with 
a corresponding attachment, you can 
wash the grid with a filter, using a neutral 
detergent and a soft brush. Dry the grid 
with the filter before using it. 

3. Remove the HEPA-filter (11) from the 

unit. To clean the HEPA-filter (11) use a 
vacuum cleaner with a corresponding 
attachment. Do not wash the НЕРА-filter 
with water.

4. Remove the cell evaporator (10) from 

the unit. To clean the cell evaporator (10) 
use a neutral detergent and a soft brush, 
then rinse it with water.  

5. Turn the water tank clamp (16) anti 

clockwise. Remove the water tank (13). 
Drain the remaining water.

6.  Wipe the water tank (13) with a wet cloth, 

dampened in a soft detergent, and then 
rinse it with water.  

7.  Wipe the body of the unit with a dry soft 

cloth. Never immerse the unit into water.

8. Do not use abrasives to clean the parts 

of the unit.

Delivery set

1.  Fan heater – 1pc.
2.  Remote control – 1pc.
3.  Battery CR 2032 – 1 pc.
4.  Cold accumulators – 2 pcs.
5.  Instruction manual – 1 pc.

SPECIFICATIONS

Power supply: 220-240 V ~ 50 Hz
Power in the heating mode: 
1000 W/2000 W
Power in the cooling mode: 65 W
Maximal air flow: not less than 20m

3

/min

Weight: 9,3 kg
Boxed weight: 13 kg
Dimensions: 360х324х798 mm
Noise level: not more than 65dB
Water tank capacity: 6,5 l

Specifications subject to change without 
prior notice.

MINIMUM SERVICE LIFE - 5 YEARS

GUARANTEE

 

Details regarding guarantee conditions can 
be obtained from the dealer from whom 
the appliance was purchased. The bill of 
sale or receipt must be produced when 
making any claim under the terms of this 
guarantee.

This product conforms to the 
EMC-Requirements as laid down 
by the Council Directive 89/336/
EEC and to the Law Voltage 
Regulation (73/23 EEC)

2173.indd   6

2173.indd   6

17.07.2008   9:55:55

17.07.2008   9:55:55

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Vitek VT-2173?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"