Timberk TOR 22.1507 AXX I - Инструкция по эксплуатации - Страница 5

www.timberk.com • electric oil filled radiator

4

5. DELIVERY SET

1. Oil-filled radiator - 1 pc 
2 Installation set - 1 pcs 
3. User manual - 1 pcs 
4. Guarantee slip - 1 pcs 

4. RADIATOR DESCRIPTION

1. front control panel
2. roller wheels to move the radiator (included in the supply set)
3. power cable holder
4. unit’s case front panel
5. radiator’s oil containing sections

Fig. 1

1

2

3

4

5

IMPORTANT! 

1. Switch on and operate the radiator only when upright (with 

wheels below and control elements above). Any other position 

may cause a dangerous situation and result in failure of the oil-

filled radiator or damage of property and the manufacturer will 

consider this as a non-warranty case.
2. Do not switch the radiator on, if roller wheels are not installed.

1. Unpack the radiator and roller wheels and remove all the packaging 

material. 
2. Overturn the radiator on a mat or no soft surface, to avoid damage to 

lacquer coating. 
3. Install wheel plates on the lower part of radiator sections, into two fixed 

supports. 
4. Draw up two finger nuts on one side and two finger nuts on the other - in 

clamp extensions passed through the wheel plate supports, after making 

sure that 2 openings in the wheel plate match together with the clamp 

extensions (see Figure 3). 
5. Turn the radiator back and tip it up.

6. ASSEMBLY AND INSTALLATION

Fig. 2

Fig. 3