Timberk TOR 21.2512 - Инструкция по эксплуатации - Страница 4

www.timberk.com • electric oil filled radiator

4

1. Handle for moving
2. Thermostat handle
3. Power mode switcher
4. Wheel
5. Front cover
6. Radiator sections
7. Cord holder

4. RADIATOR DESCRIPTION

1. Oil-filled radiator - 1 pcs 
2. Roller wheels, assembled - 2 pcs
3. U-bolt with wing nut - 2 sets
4. User manual - 1 pcs
5. Guarantee slip - 1 pcs
6. Packing - 1 pcs

Fig. 1

5. DELIVERY SET

1. Unpack the radiator and roller wheels and remove all the packaging 

material.  
2. Overturn the radiator on a mat or no soft surface, to avoid damage to 

lacquer coating.
3. Install wheel plates on the lower part of radiator sections, into two fixed 

supports. Turn the radiator upside-down on a scratch-free and stable 

surface to prevent damage to the paint finish or your floor surfacing (see 

Fig 2)
4. Fit the castor assemblies onto the radiator by placing the U-shaped bolts 

between the outermost fins on each side of the radiator (see Fig.4 - 5).
5. Securely fasten the castor assemblies onto the radiator by screwing the 

wing nuts onto the bolts (see Fig. 5).

6. ASSEMBLY AND INSTALLATION

NOTE:

Design and technical characteristics of the radiator 

heater, as well as its complete set may be changed 

by the manufacturer without prior notification, when it 

is needed to improve its quality.

2

3

5

7

6

4

1