Timberk TOR 21.1507 DPX - Инструкция по эксплуатации - Страница 5

ATTENTION!!

- Please demand from the seller to fully, clearly, and correctly fill in the 

warranty certificate.
- The warranty certificate is provided in the product package.

For  installation  of  the  purchased  equipment,  you  can  use  the  paid 

service  provided  by  specialists  of  the  authorized  service  centers  of 

TIMBERK HHA Company, who will do all necessary operations for long 

and safe use of the purchased product. You can also use services of any 

other qualified specialists, however, in this case you will lose the right for 

free warranty service, if the product fails due to improper installation.

Should you have any questions regarding service maintenance and the quality of 

purchased products, please, do not hesitate to contact us on the phone: 

+ 7 (495) 6275285

Service, cleaning & maintenance

.

 The heater should be regularly washed to remove dust from surface of 

the heating sections, since this affects its operation efficiency and 

temperature parameters of the room heating.
Before preventive operations, disconnect the appliance from the mains, 

let it cool down, and then wipe the sections with slightly wet soft cloth. 

Use of detergents including those containing abrasives is not 

recommended for washing.
Exclude damage of the appliance surface with sharp objects (for example, 

abrasive paper), since scratches on the painted surface may lead to 

occurrence of rust.

Operation conditions

.

Do not place the appliance onto unstable or uneven surfaces.

To avoid electric shock, do not insert/remove the power cord plug 

into/from the socket by wet hand, otherwise this may harm your health.

For normal operation of the appliance, the mains voltage should be 

sufficient in strict correspondence with the technical parameters 

indicated on the appliance.

The appliance should be placed strictly vertically.

NEVER USE THE APPLIANCE IN HORIZONTAL OR INCLINED POSITIONS.

NOTES

-  The  HEATING  ON  indicator  lamp  lights  up  only  in  the  event,  if  the 

appliance  is  switched  on  and  actual  room  temperature  is  below  the 

thermostat preset.

-  The  room  should  be  sealed  (without  cold  air  inflow  from  outside), 

otherwise heat outflow will disturb normal heating.

-  Check  holes  of  the  temperature  sensor  should  be  always  vented, 

otherwise the thermostat may work incorrectly.

4. Upon completion of using the appliance, switch off it in the following 

sequence:

- Turn the power mode switches to OFF position 

- Turn the thermostat knob to 0 (OFF) position up to stop anticlockwise

- Switch off the fan, unplug the power cord from the socket.

The product meets the EEC 89/336 Directive concerning electromagnetic 

equipment.

If during operation of this product you encounter malfunctions in its 

operation, which you cannot correct, please contact the nearest official 

representative of TIMBERK HHA Company in your region or an authorized 

service center, addresses of which can be found in the warranty certificate 

or in website: www.timberk.com.

We guarantee failure-free operation of the product within the period 

indicated in the warranty certificate. Please certainly read the warranty 

terms and conditions. Demand from the seller to correctly and clearly fill 

in the warranty certificate.

TIMBERK HHA Company waives any liability for possible direct or indirect 

damage inflicted by products of TIMBERK HHA Company to people, 

domestic animals, and property in the case, if it results from non-

observance of the product installation/operation rules and conditions, 

intentional or careless actions of the consumer or third persons.

Timberk

.

Timberk

, 

, 

:

1. 

2.   

3.   

 (  

)   

:

1.

2.   

3

. 

, 

c

 10%,

4.

. 

RU

BY

KG

KZ

UA

AK

TJ

 (

)

.

OS

CIS

4

www.timberk.com

electric oil felled radiator

9

www.timberk.com

2. If you want to increase working power of the appliance (and heating 

speed), press two buttons simultaneously (ON position) and turn the 

thermostat knob up to stop to the right, clockwise.
3. When the room temperature reaches the desired value, slowly turn the 

thermostat knob anticlockwise, until the indicator lamp extinguishes. 

Now, the room temperature will be continuously maintained at this value. 

If you want to raise or lower the room temperature, do the following: turn 

the thermostat knob clockwise to raise temperature or simply adjust the 

appliance power using the buttons.