Обогреватели Timberk TEC.PF9 LE 1500 IN - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
www.timberk.com • electric convector heater
9
Models TEC.PF8 LE 1000 IN, TEC.PF8 LE 1500 IN, TEC.PF8 LE 2000
IN, TEC.PF9 LE 1000 IN, TEC.PF9 LE 1500 IN, TEC.PF9 LE 2000 IN,
TEC. PF10 LE 1000 IN, TEC.PF10 LE 1500 IN, TEC.PF10 LE 2000 IN
Fig. 8
9. TRANSPORTATIOM AND STORAGE
Temperature
requirements*
Humidity
requirements*
We are exploring new technologies and we constantly improving the quality
of our products. That’s why specifications, design and accessories are
subject to change without any specific notice.
Transportation and
storage
From -30° to +50°
From 15% to 85%
(without a condensate)
* This product must have storage in dry, well-ventilated space of warehouse
at the temperature not lower than -30°
Possible malfunctions and remedies for them are given in Table 3.
Table 3
If you are not able to remedy a malfunction according to the
recommendations or other malfunctions occur, contact the authorized
service center of Timberk.
10. TROUBLESHOOTING
Malfunction
Cause
Remedy
1. The heater heats poorly
1. The heating element is faulty
1. Contact the authorized service center
of Timberk
2. Low voltage in the electric mains
2. Check voltage in the electric mains
2. The heater does not work
1. No voltage in the electric mains
1. Check presence of voltage in the
electric mains
2. Breakdown of the electric cable
2. Check integrity of the electric cable and
replace it if necessary
3. The automatic circuit breaker of the
electric mains is faulty
3. Check operability of the automatic circuit
breaker of the electric mains and replace
the faulty circuit breaker if necessary
4. Breakdown in the heating element circuit
4. Contact the authorized service center
of Timberk
Upon completion of service life, the convector must be disposed in
compliance with regulations, rules and by means, currently in force at a
disposal station. Detailed information on disposal of the convector you can
obtain at the representative of local authorities.
12. UTILIZATION
11. CIRCUIT DIAGRAMS
