Hyundai H-HV7-20-UI643 - Инструкция по эксплуатации - Страница 10

10.

Electric convector

EN

Display and button

1.  Display: LED display, Use Number to show the to use symbols to show other status.

2. 

Button: the product with 4 single buttons a button:          /        /        /       /         +        for            
Lock/          +          screen fade out

3.          Button: Power on, the product would be Press Power button for standby, Low, Middle, 

hig setting.

4.            Button: set timer

5.            Button: set the temperature and time in

6.            Button: set the temperature and time d

Temperature setting function

Temperature  setting  range  5  ℃  ~  35  ℃

default is temperature setting time,       lights, LED 

number is 1Hz, ater set the temperature 3 seconds no more keep the temperature setting, LED 
number stop la temperature 1℃ over the setting temperature, it when sensor temperature 1℃ 

below the setting to start heating.

Press        or         button to enter temperature setting function, it will show default or last time 

setting temperature, user can set the required temperature by pressing          and         button.

Timer setting function

Under standby status, user can set the boot time, under the power on (power is set) status, user 
can set the shut down time.

Boot time setting:

When the product is under stand-by status, Symbol         lashes press timer button, the product 
would be in boot time mode, symbol           lashes,         lights, LED shows the number (which was 

set last time press       or       set time from 1 to 24h, 3s no more operation, the product works 

with setting time, symbol         on, if set timer to be 0,it means cancel the timer, timer symbol     

of. Then user se power and required temperature.

Shut down time setting:

When the product is under on status, Symbol         lights, press timer button, the product would be 
in shut down time mode,        lights, L shows the number (which was set last time), press         or

        set time from 1 to 24h, 3s no more operation, the product works with setting time, symbol

        stop lashing, if set timer to be 0,it means can the timer, Then user set power and required 

temperature. Timer function would be invalid under Smart mode.

Lock function:

Press       /       together 3s, Lock function starts, (        lights on) the screen lashes, 3s later to 

be former status, when the lock function works, user press any other buttons, it will not working. 

Remove Lock function (         lights of): press         /         together 3s, Lock function stops working.