Hyundai H-HD2-20-UI586 - Инструкция по эксплуатации - Страница 10

9.

Diesel forced heater

5. OPERATION

Preparing

1. Check the heater for possible shipping damage.

2. Never use high volatile fuel such as gasoline etc.

3. Fill the fuel tank with diesel fuel as speciied in this manual observing all measures Cautions or 

check the fuel tank and make sure there is enough fuel in it.

4. Connect power cord to well-grounded ~220V, 50Hz source of power.

Start

1. Install the switch in position « I » and make sure that the fan is working properly, indicator lights 

up.

2. When you turn the fuel automatically ignites the lame of the burner and the device starts.
3. If burning lame not started, turn the switch to “0” (of) and repeat step 2.

4. Adjust the thermostat in accordance with the desired heat output, rotating the handle counter-
clockwise to increase or counterclockwise to decrease it.

Shutdown

To turn of of the appliance you need install the switch fan position «Of». Let the fan runs until the 
lame shall not be quenched. 

ATTENTION! 

If  the  ignition  has  not  happened  immediately  before  to  repeat  the 

operation, make sure that the fan is not blocked, and that the input 

and output of the air nothing prevents.

ATTENTION! 

If  the  heater  does  not  start  ater  the  third  attempt  or  no  lame 

has  a  peculiar  odor,  immediately  turn  of  the  unit  and  contact  an 

authorized service center for Hyundai.

EN