FRICO PA4225A - Инструкция по эксплуатации - Страница 36

PA3500/4200

35

GB  

Residual current circuit breaker (E)

When the installation is protected by means 
of a residual current circuit breaker, which 
trips when the appliance is connected, 
this may be due to moisture in the heating 
element. When an appliance containing a 
heater element has not been used for a long 
period or stored in a damp environment, 
moisture can enter the element. 

This should not be seen as a fault, but is 

simply rectified by connecting the appliance 
to the mains supply via a socket without a 
safety cut-out, so that the moisture can be 
eliminated from the element. The drying 
time can vary from a few hours to a few days. 
As a preventive measure, the unit should 
occasionally be run for a short time when it is 
not being used for extended periods of time.

Safety

• 

  For all installations of electrically heated 

products should a residual current 
circuit breaker 300 mA for fire protection 
be used.

• 

  Keep the areas around the air intake 

and exhaust grilles free from possible 
obstructions!

• 

  During operation the surfaces of the unit 

can be hot!

• 

  The unit must not be fully or partially 

covered with clothing, or similar 
materials, as overheating can result in a 
fire risk! (E)

• 

  This appliance is not intended for use 

by persons (including children) with 
reduced physical, sensory or mental 
capabilities, or lack of experience and 
knowledge, unless they have been given 
supervision or instruction concerning use 
of the appliance by a person responsible 
for their safety. Children should be 
supervised to ensure that they do not play 
with the appliance.

Technical data is on p. 25–26.