FIRST FA-5571-3 White - Инструкция по эксплуатации - Страница 3

4

5

ENGLISH

ENGLISH

MAINTENANCE AND CLEANING

-  Warning: Never use detergent, chemical 

damage plastic parts. 

-  WARNING: Let the appliance cool down 

completely before handling or cleaning. 

-  To prevent risk of fire or electrocution inside 

the appliance. 

-  Clean the outside wall of the appliance by 

rubbing it gently with soft, damp cloth, either 

with or without soap. 

-  Regularly clean the air inlet and outlet vents 

of the fan. 

TECHNICAL CHARACTERISTICS

220-240V • 50Hz • 2000W

Environment friendly disposal

You can help protect the environment! 

Please remember to respect the local 

regulations: hand in the non-working electrical 

equipments to an appropriate waste disposal 

center. 

4)  after enter into standby mode, if the machine 

cool down and: 

  Setting temperature – ambient temperature 

>=2°C, the machine will wake up and 

resume to heating. 

  If you want to cancel the setting 

temperature, press “ 

 ” key to choose the 

heating “ I ” or ” II ”, the product will work 

without setting temperature. While the 

display "°C" will go off. 

After continuous 

heating for 12 hours, the cool fan will work 

for 30 seconds and enter into standby mode.

SET WEEKLY PROGRAM 

(ONLY by remote control)

After complete setting of current TIME/DAY, 

below is the steps to set weekly program:

1)  Press ”   “, the product enter into working 

status. 

2)  Press “P“, lighted ”P“, it enter into weekly 

program setting: See below: A 

3)  Press ”DAY“, the display shows d1~d7, set 

to working day (Monday-Sunday: d1~d7). 

Such as set Monday: see below: B

4)  Press ”EDIT“, the display shows P1~P6 (for 

each day, it can be set maximum 6 time 

periods). Such as setting P1: see below: C

5)  Press ”TIME/on“, the display shows 00”as 

default. Press ”TIME/on““ continuously to 

set the turn-on time. Such as set the turn-on 

time 7:00am (Memo: the setting time 0-24 

for choice) see below: D

6)  Press ”TIME/off“, the display shows the 

pervious step turn-on time by default. Press 

”TIME/off“ continuously to set the turn-off 

time. Such as set the shutdown time at 

13:00pm (the display as figure), see below: 

E

A

B

C

D

E

7)  Press “+/−“ to setting the target temperature 

(Temperature range 10-49°C), 

8)  Repeat steps 2-7 above, you can set the 

whole weekly program, press ”OK“ to 

confirm the setting. 

9)  To cancel the weekly function, press the "P" 

again, the light "P" will go off. The weekly 

program is off. The product will revert to the 

previous function working status. 

Note:

-  After the above setting are completed and 

P program is working, press ”DAY / EDIT / 

TIME/on / TIME/off“ to check the setting time 

of each day and time periods, 

-   The turn-on time periods 00~24hours, 

cannot set to minutes ;

-  The “TIME/OFF” can not be less than “TIME/

ON”;

-  When the“TIME/ON” is the same as “TIME/

OFF”, the time period enter into standby 

mode;

SET OPEN-WINDOW DETECTION 

(ONLY by remote control):

1.   Press “ 

 “, the product enter into working 

status. Heating for a moment untill stable. 

2.   Press ”

“ by remote control, light 

“

/°C“ will on; The temperature display 

”23” by default. Press “+/−“ to set target 

temperature. During open-window detection 

mode, once the ambient temperature drops 

5-10°C within 10 minutes, then the product 

will stop working within 30 minutes and enter 

into stand by mode. Then press “ 

 ” to turn 

on the product. 

3.   Press ”

“ again to turn off the open-

window detection, the light ”

“ will go 

off and the product will resume to previous 

working mode. 

  Below F is an example to set 23°C during 

open-window detection. 

4.   When turn on at the same time for both 

open-window detection and weekly program, 

during the OFF period of weekly program, 

the product doesn’t work. During the working 

status of weekly program, the temperature is 

subject to the setting temperature of open-

window detection. Below G is a example:

F

G

Note:

-  Before turn on weekly program: it must set 

day and time period, otherwise the weekly 

default state is “00”, which does not work. 

Model 

FA-5571-3

Item

Symbol

Value

unit

Item

unit

Heat output

Type of heat input, for electric storage local space heaters 

only (select one)

Nominal heat 

output

P

nom

2,0

kW

manual heat charge control, with integrated thermostat

[no]

Minimum heat 

output (indicative)

P

min

0,0

kW

manual heat charge control with room and/or outdoor 

temperature feedback

[no]

Maximum 

continuous heat 

output

P

max

2,0

kW

electronic heat charge control with room and/or 

outdoor temperature feedback

[no]

Auxiliary electricity consumption

fan assisted heat output

[no]

At nominal heat 

output

el

max

0,0

kW

Type of heat output/room temperature control  

(select one)

At minimum heat 

output

el

min

0,0

kW

single stage heat output and no room temperature 

control

[no]

In standby mode

el

SB

0,000

kW

Two or more manual stages, no room temperature 

control

[no]

with mechanic thermostat room temperature control

[no]

with electronic room temperature control

[no]

electronic room temperature control plus day timer

[no]

electronic room temperature control plus week timer

[yes]

Other control options (multiple selections possible)

room temperature control, with presence detection

[no]

room temperature control, with open window detection

[yes]

with distance control option

[no]

with adaptive start control

[no]

with working time limitation

[yes]

with black bulb sensor

[no]

Contact details 

TIMETRON

 Raimundgasse 1/8, A-1020 Vienna, Austria