Cooper Hunter CH-1500 - Инструкция по эксплуатации - Страница 6

www.cooperandhunter.com

6

3. Set temperature
Press “9” again to set the temperature, the “88” and the temperature “°C” 
will flash then Press UP or DOWN arrow buttons to add 1“C or reduce 
TC. The maximum setting temperature is 45°C while the minimum one is 
5°C
4. Set timer
Press “9” twice to set timer, press “9” once again to set timer, setting time 
is displayed while timer indicator flashes (The timer Unit is hour). Press UP 
or DOWN button to add or reduce 1 hour, the timer range is 0~24 hour. 
With indicator lighting, the system starts to time according to last setting 
time if there is no operation for 5 seconds. 
5. Turn Off

K

eep pressing “9” for 3 seconds in any status to turn off the unit while 

there is without display but power indicator light.
6. Child lock
Under the working mode, press both “      ” and “     ” at the same time 
for 3 seconds to lock thesystem. Then a square “

[ ]

” is displayed. 3 

seconds later it resumes to inspection temperature display status. If 
there is a key pressed, the symbol “

[ ]

” will be showed for 3 seconds 

without buzzer hint, and then it resumes to inspection temperature 
display status again. Methods to unlock: 
1) Press power switch to shut off the electric machine. 
2) Timing is over 
3) Press both “      ” and “      ” for 3 seconds.
7. Part power & Full power choose
Press button 8 “      “  to select the output power.The heater will work 
with the full Rated output when “HI” is displayed. Press button “8” again 
to switch to “LO” heating mode.
8. Safety Feature
The unit is equipped with a high limit switch, the heater will automatically 
shut off if it is in an over-heating condition.
The heater will automatically turn back on when it has cooled down.
The device is equipped with rollover protection. The device will turn off 
when it deviates from the vertical position, and will turn on when it 
returns to its normal position.
9. Shut down memory function
Press power button (13) turn off and turn on again ,or it’s in the not 
working time and turn on ,timing / working state has power off memory 
function.

10. Cut electricity restart function 
The automatic restart function is automatically started when the power 
is switched on after power is cut off, no need to press the button.
11. Press voice
Every time effective press, buzzer will sound once. Continuous press
only sound once.

NOTE:

Safety Feature
The unit is e

q

uipped with a high limit switch, 

the heater will automatically shut off if it is in an 

over-heating condition.
The heater will automatically turn back on when 

it has cooled down.

12. WiFi reset 
Press and hold the Full/Half Power Select button (8)to reset the Wi-Fi

1 .  Download APP
Scan  the  

Q

R  code  below  for  a  simple  download  using  your  

smart  device. Alternatively, search 

‘

Cooper&Hunter SMART’ on 

your device application store to download. 

2. Connect Heater
a. Enter the interface.
b. Click the + icon in the upper right-hand corner or alternatively 
press Add Device