BRAYER BR4803 - Инструкция по эксплуатации - Страница 10

10

EN

switch the fan heater on.

• 

If the fan heater does not switch on, it may be caused 

by another malfunction. In this case apply to a 

service center for repairing of the fan heater.

PROTECTION FROM DROPPING

•  If the fan heater accidentally falls or tilts too much, 

the fall protection device will switch on and the fan 

heater will be switched off.

•  Set the fan heater into vertical position, and the unit 

will resume operation.

• 

Note: 

— place the fan-heater on a flat dry and steady 

surface to prevent it from dropping.

CLEANING AND  MAINTENANCE

•  Before cleaning the fan heater set the power switch 

(5) to the position «0», and make sure that the power 

plug is not inserted into the mains socket.

• 

Wipe the fan heater body (4) with a slightly damp 

cloth and then wipe it dry.

• 

Do not use liquid detergents, abrasive cleaners and 

any solvents to clean the fan heater.

• 

To avoid the risk of electric shock provide that no 

water or other liquid gets into the fan heater body.

•  To clean the air grids, use a vacuum cleaner with a 

corresponding attachment.

STORAGE

•  After cleaning put the fan heater away for storage 

in a dry cool place away from children and disabled 

persons.

•  Before using the fan heater next time, it is 

recommended to check the unit operability and 

integrity of the power cord isolation and the power 

cord plug.

DELIVERY SET 

1.  Fan heater — 1 pc. 

2.  Remote control — 1 pc. 

3.  Instruction manual — 1 pc. 

TECHNICAL SPECIFICATIONS 

•  Power supply: 220-240 V, ~ 50 Hz 

•  Rated input power: 2200 W 

•  Heating area: 20 m²

•  Remote control: 

 3 V — «CR2025» battery (not 

included)