ARDESTO CH-2000ECW - Инструкция по эксплуатации - Страница 33

33

EN

8. TRANSPORTATION AND STORAGE

8.1 Convectors in the manufacturer’s packaging can be 

transported by all types of covered vehicles, which en-

sure their protection against atmospheric precipitation 

and mechanical damage, in accordance with the rules 

for the carriage of goods in force on this type of trans-

port. Transportation is allowed at temperatures from 50 

°C to -50 °C and relative humidity not more than 80 %, in 

accordance with the handling signs on the package, and 

with the exception of shock and movement inside the 

vehicle.

8.2 Convectors should be stored in the manufacturer’s 

packaging in dry, heated rooms at temperatures from 

5 °C to 40 °C and relative humidity not exceeding 80 %. 

Storage of convectors in rooms together with liquids 

and substances, the evaporation of which can cause 

corrosion of structural elements is not allowed.

9. DISPOSAL

The product does not contain materials requiring special disposal 

technologies. The product does not contain precious metals. Upon 

decommissioning, the product should be disassembled, followed by 

sorting the scrap into non-ferrous, ferrous metals and non-metals, 

and their disposal in accordance with the norms, rules and methods 

applicable at the disposal sites.

10. COMPLIANCE WITH TECHNICAL REGULATIONS

The products comply with the requirements of the Technical regulation on 

the electromagnetic compatibility of equipment (approved by the Cabinet of 

Ministers of Ukraine dated December 16, 2015 No. 1077), the Technical safety 

regulation of low-voltage electrical equipment (approved by the Cabinet of 

Ministers of Ukraine dated December 16, 2015 No. 1067).

Technical Regulations for Restricting the Use of Certain Hazardous Substances in 

Electeical and Electronic Equipment (approved by the Resolution of the Cabinet 

of Ministers of Ukraine dated March 10, 2017 No. 139).