Navitel T700 3G NAVI - Инструкция по эксплуатации - Страница 73

T700 3G NAVI

 |  5

EN

Using Device in Vehicle

Windscreen holder

Carefully select a place to attach the holder. Do not attach the holder to the windscreen in a way that limits the driver’s line of sight.  

If the car windscreen contains a built-in heating system or UV protection, the quality of signal reception may be lower than usual.

Set-up of windscreen holder

First remove the protective layer from the vacuum cup. Then, select an appropriate place to attach the holder. Make sure the area 

is clear of dust, dirt, and moisture, and then secure the vacuum cup on the windscreen. Under normal operating conditions, the 

vacuum cup holder locks the device well. However, if you leave it there overnight, the holding strength may get weaker as a result 

of moisture condensation due to temperature fall. For this reason, in order to prevent the device and holder from being damaged, 

it is recommended to remove the device and holder from the windscreen.

Safety requirements

•  Do not disassemble or repair tablet by yourself. In case of tablet failure, contact the service center. 
•  Permissible ambient temperature in operating mode: -10 to +40 °С. Storage temperature: +5 to +55 °С. Relative humidity: 5% 

to 90% without condensation (25 °С). 

•  Put the tablet away from fire sources to avoid explosion or fire. 
•  Do not expose the tablet to physical impacts. 
•  The manufacturer is not responsible if the screen is damaged by the user. 
•  Avoid contacting the tablet with sources of electromagnetic radiation. 
•  Do not use chemicals or detergents to clean the product; always turn off the tablet before cleaning. 
•  Use accessories only approved by manufacturer.