Navitel RE900 - Инструкция по эксплуатации - Страница 8

8  |  

USER MANUAL

EN

Getting started

Turning the device on/off

To turn on the device, press and hold the Power button on the 
top of the device for a few seconds.
To switch the device to sleep mode, press the Power button 
once.
To turn off the device, press the Power button on the top panel. 
In the menu that appears select and press “Power Off“.

Device operation

The device has the touch screen. Touch the screen to operate 
the device 

—

 select an app, a file or confirm any action. 

Device installation

1. Put microSD card into the device.
2. Fix the case clip on the windscreen holder. Do not use exces-
sive force to avoid any damage.
3. Connect the car charger to the cigarette lighter socket. 
4. Adjust the lens. Make sure that it is parallel to the ground and 
the ratio of the sky and the earth in the image is about 4 to 6.
5. The device will turn on automatically.

Note

: To protect the device from sudden surges in the on-board 

power supply, always connect the car adapter only when the 
engine is on. 

Work with micro-SIM card

Install the micro-SIM card with the contacts facing the lens until 
it clicks. If the connection is successful, you will see the connec-
tion type and the signal level in the top line of the screen.

Precautions

1. Use only the original charger adapter. Using another adapter 
may negatively affect the device’s battery.
2. Do not use the device in humid or hot environment.
3. Keep the camera lens clean.
4. Do not disassemble the device and do not perform repairs 
by yourself.
5. Strictly follow the laws and regulatory acts of the region 
where the device is used. This device can not be used for illegal 
purposes.
6. Do not configure the device while driving. The device in the 
car can only be used in a regular mount. Make sure that the 
device does not close the driver’s view and does not interfere 
with the deployment of airbags.

Remember!

 Road safety comes first!