Garmin Tanita_BC_1000 - Инструкция по эксплуатации - Страница 4

2

Preparations before use

 Inserting the Batteries

Open the battery cover on the back of the measuring platform. Insert the supplied 
AA-batteries as indicated.

Note:

Be sure that the polarity of the batteries is set properly. If the batteries are 
incorrectly positioned the fluid may leak and damage floors. If you do not intend 
to use this unit for a long period of time, it is advisable to remove the batteries 
before storage.

Please note that the included batteries from the factory may have decreased energy levels 
over time.

 Positioning the Monitor

Place the measuring platform on a hard, flat surface where there is minimal vibration to ensure safe 
and accurate measurement.
Use carpet feet when the scale is used on soft surface, such as rugs or carpetings.

Note :  To avoid possible injury, do not step on the edge of the platform.

Handling Tips

This monitor is a precision instrument utilizing state-of-the-art technology.
To keep the unit in the best condition, follow these instructions carefully:
• Do not attempt to disassemble the measuring platform.
• Store the unit horizontally.
• Avoid excessive impact or vibration to the unit.
• Place the unit in an area free from direct sunlight, heating equipment, high humidity, or extreme temperature change.
• Never submerge in water. Use alcohol to clean the electrodes and glass cleaner (applied to a cloth first) to keep them shiny; avoid 

soaps.

• Do not step on the platform when wet.
• Do not drop any objects onto the platform.
• Do not use this scale while operating transmitters (such as a cell phone) as this may affect your results.
• If not in use for a prolonged period of time it is recommended that you remove the batteries.

Getting accurate readings

To ensure accuracy, readings should be taken without clothing and 
under consistent conditions of hydration. If you do not undress, 
always remove your socks or stockings, and be sure the soles of 
your feet are clean before stepping on the measuring platform. Be 
sure that your heels are correctly aligned on the measuring platform. 
Don’t worry if your feet appear too large for the unit -accurate 
readings can still be obtained if your toes overhang the platform.
It is best to take readings at the same time of day. Try to wait about 
three hours after rising, eating, or hard exercise before taking 
measurements.
While readings taken under other conditions may not have the same 
absolute values, they are accurate for determining the percentage of 
change as long as the readings are taken in a consistent manner. To 
monitor progress, compare weight and body fat percentage taken 
under the same conditions over a period of time.

Note :

An accurate reading will not be possible if the soles of your feet are not clean, or if your knees are bent or you are in a sitting 
position.

Heels centered on 
electrodes

Toes may overhang 
measuring platform

Open as shown.

Direction of 
the batteries.

Detachable Carpet Feet (only for 
piles up to 0.28” ( 7 mm) thick)

BC-1000win.indd   2

2010/04/26   19:39:39