Monster ROC Sport SuperSlim In-Ear (137047-00) - Инструкция по эксплуатации - Страница 5

Pair Another Phone

Multipoint technology enables you to pair another 
phone and take a call from either. 

To pair with another mobile phone, power off 

the headphone, then follow the steps for “Pair 
one phone”. After pairing successfully, restart the 
headphone to connect to 2 paired mobile phone 
automatically and manually.

Note:

 You may need to connect the second  

phone manually.

Call

Answer a Call:

 Press the Multifunction button once.

Reject a Call:

 Press and hold the Multifunction 

button for about 1 second.

End a Call:

 Press the Multifunction button once.

Redial the Last Call:

 Press Volume”+” and “-” for 

about 3 seconds in standby mode. The mobile 
phone will redial the last call number.

Mute On/Off:

 Press the Volume “-” for about  

3 seconds to mute on/off.

Switch Between the Headphone and Phone:

Press the Multifunction button for about 1 second 
during a call, the call will be switched to the mobile 
phone, redo this operation again, the call will be 
switched to the headphone.

End Current Call and Answer New Call:

 When a 

new call rings during a call, press the Multifunction 
button once to answer new call and end current 
call simultaneously.

On Hold Current Call and Answer New Call:

When a new call rings during a call, double press 
the Multifunction button to hold current call and 
answer new call. To switch between held call and 
active call, double press the Multifunction button.

Activate Voice Dialing:

 Double press the 

Multifunction button to trigger the voice dialer,  
this function varies with user’s smartphone.

Music

Play / Pause Music:

 Press Multifunction button 

once to play / pause music. (Some phones may 
require you to start a media player first).

Track Back / Forward:

 Press the Volume “-” for  

1 second once to skip track backward, press Volume 

“+” for 1 second once to skip track forward.

Switch Music and Call:

 When a call rings during a 

music playing, the music automatically pauses to 
allow you to answer or ignore the call. Once the call 
is ignored or ends, the music is resumed.

More Features

Battery Indicator

When the headphone is connected to a device with 
iOS system, a battery indicator will appear at the 
upper right of the system, indicating battery status 
of the headphone.

Auto Power-Off

When the distance between the headphone and 
the mobile phone is beyond effective range, a 
warning tone will be alerted and headphone will try 
to reconnect with the mobile phone for 10 minutes. 
If no phone is reconnected within 10 minutes, the 
headphone will go to connectable mode and wait 
for 5 more minutes before automatically power off.

Automatic Connection After 

Powering On

When the headphone and phone have been 
paired once, they will automatically connect when 
the headphone is on and 

Bluetooth

 is activated 

on the phone.

Connection Standby

After successful pairing and connection, you will 

hear the voice prompt “Phone 1 connected”. The 
headphone will be in turning on mode or standby 
mode automatically and the blue LED will flash 

once every 5 seconds. When the phone disconnects 
the headphone, you will hear the disconnect tone.

Reset Paired Device(s)

Go to the Pairing mode (hold the Multifunction 
button for 5 seconds from Power off state),  then 
hold the Volume “-” to reset the paired device(s), 
indicator light flashes blue and red alternatively 
and rapidly few times, you will also hear the tone.

Hardware Reset

Plug the Micro USB cable into the USB micro port 
of headphone to connect it to the computer or 
other device made for USB charging to have the 
hardware reset.

Certification

FCC ID: RJE190653

This device complies with Part 15 of FCC Rules. 

Operation is subject to the following two 
conditions: (1) This device may not cause harmful 
interference, and (2) This device must accept any 
interference received, including interference 
that may cause undesired operation. Changes or 
modification not expressly approved by the party 
responsible for Compliance could void the user’s 
authority to operate the equipment. Connecting of 
peripherals requires the use of grounded shielded 

ENGLISH

ENGLISH