Настольные часы VITEK VT-6604 BK - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
9
ENGLISH
Radio stations programming
You can tune and save the settings for 10 radio stations in
both FM and AM bands.
•
Tune in to the radio station you want to program.
•
Press and hold the button (1) «
PRESET/MEM
» until the
flashing symbol «
Р01
» appears.
•
Consequently press the button (2) «
HOUR/
9
»
or (3)
«
MIN/
:
»,
to select the number of the programming cell.
•
Press the button (1) «
PRESET/MEM
» again to save the
selected settings.
•
Repeat the previous steps for all radio stations the frequen-
cies of which you wish to save in the clock radio memory.
•
To select the preliminary recorded radio stations press
the button (1) «
PRESET/MEM
» in the radio mode.
Automatic radio switch off
You can set the radio switch-off time.
•
Press the button
(9) «SNOOZE/SLEEP/DIMMER»
in
the radio mode. The «
90
» symbols will appear on the
display, that means automatic radio switching off in
90 minutes.
•
Set up the necessary auto switch off time (
90
,
80
,
70
,
60
,
50
,
40
,
30
,
20
,
10
) by pressing the button
(9)
«SNOOZE/SLEEP/DIMMER»
repeatedly.
•
To cancel this function, press the button
(9) «SNOOZE/
SLEEP/DIMMER»
repeatedly until the «
OFF
» appears
on the display or switch the radio off by pressing the but-
ton (1) «
PRESET/MEM
».
EXTERNAL DEVICE CONNECTION
You can listen to the sound signal from the external device
through the clock radio speaker (15). To connect the exter-
nal device use the socket (18)
«AUX IN».
•
Connect the external device using the 3.5 mm audio
cable (not included).
•
Connect the clock radio to the mains and consequently
pressing the button (8) «
SOURCE/ALM OFF»,
select
the external device playback mode. The «
AUX
» symbol
will appear on the display (10) for a short time.
•
Switch your device on and follow the playback recom-
mendations.
•
Use the buttons (6)
«VOL–»
and (7)
«VOL+ »
to set up
the desired volume level.
•
After you finish listening switch the device off and dis-
connect it from the clock radio.
VT-6604_IM_70x130.indd 9
01.07.2015 17:24:17
