Настольные часы VITEK VT-6604 BK - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
7
ENGLISH
digits and the selected alarm indicator (11) or (13) will
appear on the display.
•
Consequently press or hold the button (2) «
HOUR/
9
»
to set the alarm time in hours.
•
Consequently press or hold the button (3) «
MIN/
:
»
to set the alarm time in minutes.
•
To finish the setup procedure press the button (4)
«
ALM1
» or the button (5) «
ALM2
» respectively.
•
Select the necessary alarm signal: sound signal
(«
Buzzer
» symbol) or radio switch on («
Radio
» symbol).
To do it, consequently press the button (4) «
ALM1
» or
the button (5) «
ALM2
» in the current time mode.
Depending on your choice the corresponding indicator
will light up:
– the indicator (11) shows that the first alarm sound signal
is selected as an alarm signal;
– the indicator (12) shows that the radio is selected as the
first alarm signal;
– the indicator (13) shows that the second alarm sound
signal is selected as an alarm signal;
– the indicator (14) shows that the radio is selected as the
second alarm signal;
Notes:
– If you want to select the radio as an alarm signal,
tune in to a required radio station preliminarily (see
“Radio stations reception”).
– The alarm actuation is possible only when the unit is
connected to the mains.
– If the buttons
(2) «HOUR/
9
»
or
(3) «MIN/
:
»
are
not pressed within 10 seconds during the setup
process, the unit will be switched back to the cur-
rent time mode
.
– At the alarm actuation the volume level increases
gradually from minimal to maximal value within
10 seconds.
Switching the alarms on/off
•
To switch the alarm (alarms) off in the current time mode
consequently press the button (4) «
ALM1
» or the but-
ton (5) «
ALM2
», until the corresponding alarm indica-
tors go out.
•
To switch the alarm (alarms) on in the current time mode
consequently press the button (4) «
ALM1
» or the but-
ton (5) «
ALM2
», until the corresponding alarm indica-
tor lights up.
VT-6604_IM_70x130.indd 7
01.07.2015 17:24:17
