Настольные часы FIRST AUSTRIA FA-2421-4 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
4
5
SlEEP oPERATioN
When listening to radio, press Snooze/Sleep button (4) to enter sleep mode. You
can just adjust the sleep timer from 90mins to 15mins by pressing the Snooze/Sleep
button (4). The unit will automatically turn off after the selected time.
NAP TiMER FUNCTioN (CoUNT doWN TiMER)
During radio off mode, press MEMORY/MEMORY+/NAP/AUTO OFF DISPLAY button
(1) to turn on NAP mode, the NAP time will keep by 5 seconds, within 5 seconds and
press MEMORY/MEMORY+/NAP/AUTO OFF DISPLAY button (1) button can change
the duration from 90min-10min.
The alarm buzzer will sound for 30min and then shut off automatically. To stop the
alarm buzzer, press the ON/OFF button (9).
Press the MEMORY/MEMORY+/NAP/AUTO OFF DISPLAY button (1) has no effect
during alram operation. Press ON/OFF button (9) to cancel NAP function.
Remark:
When using the NAP alarm did not the wake up light function
PRojECTioN UNiT
• Focus setting: Adjust the projection clock brightness/focus by tuning the
brightness/focus adjustment wheel unit the projected time is clearly shown on the
ceiling or wall.
• Adjust projected direction.
• To flip projected image by 180°, press 180° flip button (22).
• Converted the projection time or temperature, press keep depress over 2 seconds
to enter PROJECTION TIME 180 FLIP/TIME-TEMPERATURE button (22).
NOTE: PROJECTS TIME IMAGE ON THE CEILING OR WALL OF A DARKENED
rooM.
MAXIMUM PROJECTION DISTANCE IS 3-9 FEET.
Select dST (daylight saving time) mode
For countries with daylight saving time (DST), the clock radio offers you DST option to
adjust summer time.
In standby mode press and hold >>/TUNE+/DST button (7) for 2 seconds. The clock
advances by one hour.
To exit DST mode, repeat the above operation.
RESETTiNg
If the system does not respond or exhibits erratic or intermittent operation, you may
have experienced an electrostatic discharge (ESD) or a power surge that triggered the
internal microcontroller to shut down automatically. If this occurs, simply disconnect
the AC power cord and remove the system backup battery, wait for at least 3 minutes
and then setup the unit again as if it is a brand new unit.
WARNiNg
1. No naked flame sources, such as lighted candles, should be placed on the
apparatus.
2. Do not place the product in closed bookcases or racks without proper ventilation.
3. Where the mains plug is used as the disconnect device, the disconnect device
shall remain readily operable.
4. The ventilation should not be impeded by covering the ventilation openings with
items, such as newspapers, table-cloths, curtains, etc.
5. It shall not be exposed to dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on the apparatus.
6. Do not connect FM antenna to outside antenna.
EN
gli
SH
EN
gli
SH
7. The unit should not be exposed to direct sunlight, very high or low temperature,
moisture, vibrations or placed in dusty environment.
8. Do not use abrasive, benzene, thinner or other solvents to clean the surface of the
unit. To clean, wipe it will mild non-abrasive detergent solution and clean soft cloth.
9. Never attempt to insert wires, pins or other such objects into the vents or opening
of the unit.
10. Disconnect device warning: Mains plug is used as the connection, so it should
always remain ready operate.
11. Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
12. Class 1 LED product.
CAUTioN
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
SPECiFiCATioNS
Frequency range:
FM 87.5-108MHz
Battery backup:
3V (1x3V CR2032 Flat Lithium battery) (Not included)
Power source:
AC 230V ~ 50Hz
Temperature range
for indoor:
0 to 50°C or 32 to 122°F
Environment friendly disposal
You can help protect the environment! Please remember to respect the local
regulations: hand in the non-working electrical equipments to an appropriate waste
disposal center.