Мясорубки VITEK VT-3611 W - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
6
ENGLISH
•
Do not run the appliance for more than
5 minutes continuously.
•
After 5 minutes of continuous use, switch
the unit off and allow it to cool down dur-
ing 15-20 minutes before further operation.
•
After you finish operating, switch the meat
grinder off, setting the switch (7) to the
position «0» and unplug the unit; after that
you can disassemble it.
MEAT PROCESSING
•
Install the meat grinder head (3) to the set-
ting place (4), and turn it counterclockwise
until it is fixed (pic. 1, 2).
•
Install the screw (8) into the meat grinder
head body (3) (pic. 3).
•
Install the crossed blade (9) (pic. 4).
•
Select one of the plates (10 or 11) and set
it over the blade, matching the ledges on
the grate with the grooves on the meat
grinder head body (3), tighten the nut (12)
(pic. 5, 6).
Attention!
–
Face the blade cutting side to the grate.
If the blade is installed improperly, it will
not grind the products.
–
The coarse cutting plate (11) is used for
processing raw meat, vegetables, dried
fruit, cheese, fish, etc.
–
The fine cutting plate (10) is suited for
processing both raw and cooked meat,
fish etc.
•
Place the food tray (2) on the meat grinder
head body (3).
•
Switch the meat grinder on by setting the
switch (7) to the position «ON».
•
During the operation use only the pusher (1).
Note:
–
For better meat processing, slice it in
cubes or stripes. Defrost frozen meat thor-
oughly.
–
During the operation use only the pusher
supplied with the unit; do not use any other
objects, do not push meat with your hands.
•
After you finish operating, switch the meat
grinder off, setting the switch (7) to the
position «0» and unplug the unit; after that
you can disassemble it.
•
To remove the meat grinder head press the
lock button (5), turn the meat grinder head
(3) clockwise and remove it.
•
To disassemble the meat grinder head,
unscrew the nut (12) and take out the
installed plate (10 or 11), the blade (9) and
the screw (8) from the meat grinder head
body.
AUTO SWITCH-OFF FUNCTION
•
The meat grinder is equipped with auto
switch-off function to prevent motor unit
overheating.
•
In case of overheating of the motor, the
automatic thermal switch will be on, and the
meat grinder will be switched off.
•
If this occurs remove the power plug from
the mains socket immediately.
•
Let the meat grinder cool down for approxi-
mately 50-60 minutes before switching it
on again.
•
Plug the meat grinder into the mains, switch
it on, if the meat grinder can not be switched
on, this may mean that it is otherwise dam-
aged. In this case contact the authorized
service center for repairing the meat grinder.
MEAT GRINDER CARE
•
After finishing operation, switch the meat
grinder off by setting the switch (7) to the
position «0», and unplug the unit.
•
Press the lock button (5), turn the meat
grinder head clockwise and remove it.
•
Unscrew the nut (12) and remove, the
plates (10 or 11) and the blade (9) from the
screw (8).
•
Remove the screw (8) from the meat grinder
head (3).
•
Remove remains of the food products from
the screw.
•
Wash all the parts of the meat grinder with
warm soapy water and a neutral deter-
gent, then rinse and dry thoroughly before
assembling.
•
Wipe the meat grinder body (6) with a damp
cloth.
•
Do not use solvents or abrasives to clean
the meat grinder body (6).
•
Provide that no water gets inside the meat
grinder body.
•
Oil the plates (10, 11) and the blade (9) with
vegetable oil before taking the dried acces-
sories away for storage – this will protect
them from oxidation.
VT-3611.indd 6
12/12/19 3:00 PM
