Bosch MFW3X10W - Инструкция по эксплуатации - Страница 25

 25

en

Citrus press attachment

Citrus press attachment

For squeezing juice out of citrus fruits, 

e.g. lemons, oranges, grapefruits.

Preparation

W

Risk of injury!

The attachment for the citrus press is 

directly assembled on the base unit. Do not 

insert the mains plug until all preparations 

for working with the appliance are complete.

Caution!

The base unit is moved through 90° for 

preparation and use of the citrus press 

attachment. Never use other attachments in 

this position.

X

Fig. 

I

1. 

Hold the base unit by the carrying 

handle and carefully tip up so the 

drive points upwards. Possibly turn the 

base unit to make the buttons easily 

accessible.

2. 

Insert the driving shaft with the spring 

element pointing down in the drive of the 

base unit.

Caution!

It should be possible to push the driving 

shaft down lightly with your finger. It must 

not get sticky with residue from juice or 

become blocked with pips or foreign bodies.

3. 

Fit the collecting tray onto the drive at an 

angle.

4. 

Turn the collecting tray anticlockwise until 

you hear it click into position.

5. 

Fit the filter insert onto the collecting tray.

6. 

Fit the pressing cone onto the driving 

shaft.

The citrus press attachment is now fitted to 

the base unit and prepared.

Use

X

Fig. 

J

1. 

Cut the citrus fruits in half.

2. 

Place a suitable container under the 

attachment.

3. 

Connect the mains plug. Switch on the 

appliance. The drive is running.

Caution! (MFW3X...) 

After switching on, the appliance runs at 

speed 

2

 (fast). To use the citrus press, you 

must press button 

+

 once to switch 

to speed 

1

 (slow). 

X

 “Speed setting” see 

page 22

4. 

Position the halved citrus fruits with 

the cut surface on the pressing cone 

and press down. As soon as the fruit 

is pressed onto the pressing cone, the 

cone will rotate.

5. 

To finish the process, reduce the 

pressure on the cone.

6. 

Once you have finished, switch off the 

appliance and pull out the mains plug.

7. 

Hold down the release button and 

turn the attachment clockwise until it 

disengages.

8. 

Remove the attachment, take it apart 

and clean all parts. 

X

 “Care and daily 

cleaning” see page 27

Notes:

– To obtain the largest amount of juice, 

the pressing procedure should be 

repeated a few times.

– The filter insert with the pulp and pips 

should be emptied as necessary.

Grain mill attachment

For grinding products such as wheat, 

oats, rice, coffee beans, peppercorns, 

wild mustard, walnuts, hazel nuts, dried 

mushrooms, almonds, soya, linseeds, 

buckwheat groats, shelled sunflower seeds, 

etc. The appliance is not intended to be 

used for grinding very hard products such 

as dried peas, maize or popcorn. 

X

 “Tips” 

see page 28

Preparation

X

Fig. 

K

1. 

Place the adjustment screw in the 

setting ring. Ensure that the scale points 

upwards.

2. 

Press the adjustment screw towards the 

grinding chamber and turn the setting 

ring in a clockwise direction until the 

scale for the grinding level is reached.