Bosch MFW 2510W - Инструкция по эксплуатации - Страница 26

26 

en

Care and daily cleaning 

Use

W

Warning 

Risk of injury!

– Do not reach into the feed chute with 

your hands.

– Only use the pusher when adding more 

food.

Caution!

– Remove hard fruit peel, pips and stalks.

– Berries such as e.g. currants can be 

pressed together with their stalks. 

– Fruit with larger pips and stones such as 

e.g. plums and cherries must have their 

pips or stones removed before juicing.

– Do not process frozen fruit.

– Do not apply great force with the pusher.

X

Fig. 

J

1. 

Fit the prepared attachment onto the 

drive of the base unit, holding it at an 

angle.

2. 

Turn the attachment anticlockwise until 

you hear it click into position. Tighten 

threaded ring.

3. 

Fit the filling tray and insert the pusher 

in the feed chute.

4. 

Prepare the fruit. Chop up large fruit 

beforehand so it fits into the feed 

chute without having to be pressed in. 

Remove larger pips and stones (e.g. 

cherries, plums).

■

Place one container under each of the 

apertures for juice and for the pulp.

■

Add the prepared fruit to the filling tray.

5. 

Connect the mains plug. Switch on the 

appliance. 

6. 

Use the pusher to slide the fruit down 

the feed chute, applying light pressure. 

7. 

The pressed juice flows out from 

the outlet funnel. The pulp (solid 

components) is pressed through the 

pulp nozzle. 

8. 

Adjust the pulp nozzle. Unscrewing 

makes the pulp more moist; screwing 

in makes it dryer and more juice flows 

from the funnel. If the pulp is too dry, 

unscrew the nozzle, to avoid clogging 

the appliance with the pulp.

9. 

Once you have finished, switch off the 

appliance and pull out the mains plug.

10. 

Remove the filling tray and pusher.

11. 

Hold down the release button and 

turn the attachment clockwise until it 

disengages.

12. 

Remove the attachment, take it apart 

and clean all parts. 

X

 “Care and daily 

cleaning” see page 26

Care and daily cleaning

The appliance, all attachments and the 

relevant accessories must be thoroughly 

cleaned after each use.

W

Risk of electric shock!

– Disconnect the mains cable from the 

socket prior to cleaning.

– Never immerse the base unit in liquids 

and do not clean in the dishwasher.

W

Risk of injury!

Do not reach into the sharp blades and 

edges of the shredding and slicing inserts.

Caution!

– Do not use any cleaning agents 

containing alcohol or spirits.

– Do not use any sharp, pointed or metal 

objects.

– Do not use abrasive cloths or cleaning 

agents.

Fig.

K

 gives an overview of how to clean 

the individual parts.

■

Wipe the outside of the base unit with a 

soft, damp cloth and dry off.

■

Dismantle the attachments used in 

reverse order (see „Preparation“ for the 

relevant attachment).

■

Clean all accessories with a detergent 

solution and a soft cloth/sponge or with 

a soft brush.

■

Allow all parts to dry.