Музыкальные центры VITEK VT-3492 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
CLEANING OF EXTERNAL SURFACES
• To avoid fire or electrical shock, unplug the system from electrical outlet before cleaning it.
• Be careful while cleaning the plastic parts. If the system's cabinet gets dusty, wipe it with the soft dry
fabric.
•To clear front panel from dust and fingerprints, wipe it with the soft fabric wetted in the light soap solu-
tion.
• Never use abrasive materials or polishing materials, because they can damage the external sur-
faces.
WARNING: DO NOT ALLOW WATER AND OTHER LIQUIDS TO GET INSIDE THE SYSTEM.
TROUBLE-SHOOTING
In the case you have encountered the troubles with operation of the system, please, acquaint yourself
with the recommendations below.
18
ENGLISH
TROUBLE
POSSIBLE REASON
SOLUTION
Noise or poor
AM/FM receiver is not tuned
Correct the station settings on
reception AM
correctly
the AM or FM bands
or FM bands
FM: Antenna is not spread at
Fully spread the FM antenna
the full length.
AM: The system is
Turn the body of the system
unsatisfactorily placed
until the AM station reception
gets better.
FM STEREO
FM STEREO mode is not on
Choose the FM STEREO mode
indicator does not
and tune up the antenna.
light up
No sound while listening
TUNER mode is not switched on.
Switch the TUNER mode on.
to the stations of AM
and FM bands
Volume level is too low.
Increase the volume level.
No sound.
TAPE mode is not switched on.
Switch the TAPE mode on.
Volume level is too low.
Increase the volume level.
The sound is distorted
Magnetic heads are dirty.
Clear the magnetic heads.
Tape playback speed
Magnetic tape is old or
Replace the cassette.
is not constant.
damaged.
Pinch rollers or capstan
Clean pinch rollers or
axis are dirty.
capstan axis.
Cannot record.
The safety tabs have been
Seal the appropriate holes on
removed.
the cassette with adhesive tape.
Distorted sound while
Magnetic tape or magnetic
Replace the cassette or clean
playback of the
heads are dirty.
the magnetic heads.
recorded tape.
3492.qxd 20.10.2004 18:30 Page 18
