Музыкальные центры VITEK VT-3492 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
3.
Press the REPEAT button (17) or (32) three times to repeat
album (folder).
4.
To cancel the repeat function, press REPEAT button (17) or (32)
several times, until the REPEAT icon on the LCD will have lit down.
RANDOM FUNCTION
Pressing the RANDOM button (49) of the remote control unit, before
or during CD playback, will turn on the function of random playback
of tracks. To cancel this function, press the RANDOM button again.
Playback of the 7th track from the 12th album
INTRO FUNCTION
In STOP mode press the INTRO button (35) of the remote control
unit to playback tracks in introduction mode. In this mode, the first
10 seconds of every track will be played. To restore normal playback
mode, press the INTRO button (35) again.
MP3 PROGRAMMED PLAYBACK
It is possible to program the track playback order (up to 64 tracks). At the beginning of programming
procedure make sure that CD is in the STOP mode.
15
ENGLISH
1.
Press the PROGRAM button (20) or (50)
once.
2.
With the SKIP/SEARCH buttons (1) or
(39)/(47) select desired album (folder).
3.
Press the PROGRAM button (20) or (50)
again, and then press SKIP/SEARCH buttons
(1) or (39)/(47) or the numeric buttons (51) of
the remote control unit to choose the desired
track.
4.
Press the PROGRAM button once again, the
track 6 of album 3 is stored in memory.
5.
To continue programming, repeat steps 2
and 3.
6.
Press the PLAY/PAUSE button (3) or (38) to
start playback of programmed tracks.
Example: Playback of the 6th track from the 3rd
album
Note: To repeat playback of programmed
tracks, press the PROGRAM button (20) and
then the PLAY/PAUSE button (3) (it is possible
only if LCD keep showing MEMORY symbol).
TO VIEW PROGRAMMED TRACKS
In CD playback stop mode, press the PRO-
GRAM button repeatedly to view sequential
numbers of the programmed tracks.
TO CLEAR THE PROGRAMM
Press the STOP button (2) or (40) to cancel pro-
gramming (or open ÑD compartment or choose
another playback mode).
3492.qxd 20.10.2004 18:30 Page 15
