Telefunken TF-PS2201 - Инструкция по эксплуатации - Страница 4

4

Instruction manual

Utilization of the product

If you want to dispose this product, do not 

mix it with general household waste. There is a 
separate collection system for used electronic 
products in accordance with legislation that 
requires proper treatment, recovery and 
recycling.

Please contact your local authorities for 

the correct method of disposal. By doing so, 
you will ensure that your disposed product 
undergoes the necessary treatment, recovery 
and recycling and thus prevent potential 
negative effects on the environment and 
human health.

Important safeguards

• The instruction manual contains important

operating and maintenance instructions. For 
your safety, it is necessary to refer the manual. 
Keep the manual for use in future.

• Do not hit or drop the unit.
• Do not expose the unit to vibration, direct

sunlight, too high or low temperature or humidity.

• Do not disassemble the unit yourself.

Refer servicing to qualified service personnel.

General operations

Power on/off

Press and hold the POWER button to switch 
the unit on. Press and hold it again to switch 
the unit off.

Line input

You can connect the audio output of an 

external device to this unit, to listen to the sound 
of that device through the speakers of this unit.

• To connect an external audio device,

please use a standard audio cable with 3.5-
to-3.5 mm plugs to connect the input terminal 
LINE IN on the unit.

switch to the LINE IN mode. The display 
screen will show "LINE".

• Turn on the external device. You cannot

control playback with the buttons of this unit 
except adjusting the volume.

Volume control

Rotate the master volume knob to adjust the 

general volume level of the unit.

You can also separately adjust the volume of 

microphone (if connected) by rotating the 
microphone volume knob.

Modes

Press the SOURCE button repeatedly to 

select an operation mode: Bluetooth => LINE 
=> USB => SD => TUNER. The USB and SD 
modes are available only if an appropriate 
storage device is plugged in.

Power supply

• The unit operates on an internal

rechargeable Li-ion battery.

• The battery can be recharged with

the provided AC power cord. Before first 
plugging the appliance check that voltage 
indicated on the rating label corresponds to 
the mains voltage in your home.

• Insert the power cord into the

AC power input socket on the side of the unit.

• Plug the power cord into the wall outlet.
• Press and hold the POWER button to

switch on the unit.

• The percentage of battery charge will be

shown

 on the screen when you press the 

POWER button shortly.

• For best results, try to fully charge the

battery before each use. If the battery is 
drained, please allow it to recharge for a few 
hours.

Checking the battery life

• This device is designed with a smart

battery check feature for your convenience.

• Press the battery level button to display

the current battery charge level while the unit 
is not charging.

 The charging indicator lines 

will keep flashing during charging.

4 lines are lit ~ 100% full
3 lines are lit ~ 75% full
2 lines are lit ~ 50% full
1 line is lit ~ 25% full (charging is needed).

• Press the SOURCE button to