Мультиварки Vitesse VS-595 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
and insert the cup into the housing. Gently turn it counter-clockwise, make
sure that the cup is in contact with the heating element.
4.
Close the cover until it clicks. If the lid is not closed
properly, the program will be on the preparation work
correctly.
5.
Connect the device to the mains.
6.
Press “Select Program” button and choose the Steam
Function. Automatic cooking time: 10 Mins.
7.
You can change it (in the range from 1 minute to 99
Minutes) by pressing the cooking time.
Keep in mind that these are general recommendations. Actual time may differ
from the recommended values, depending on the freshness and the specific
type of product, as well as your preferences.
8.
Press the START button to begin the cooking process, the display will show
the countdown.
9.
At the end of the cooking process you will hear a beep and the Multi Cooker
will automatically switch to Keep warm maintain the temperature of prepared
dishes: steaming light goes out, starts flashing keep warm mode: Steam
Function LED goes out and Keep Warm LED will keep flashing. Despite the
fact that the regime is willing to maintain the temperature of food for 8 hours or
more, do not leave food in this mode for a long time, it can lead to drying of the
product.
P/9
P/10
PROGRAM "DEEP FRY"
1.
Prepare the necessary ingredients and keep ready.
2.
Make sure that all the ingredients (including liquid) were below the MAX, is
located inside the bowl.
3.
Insert the cup into the housing. Gently turn it counter-clockwise, make sure
that the cup is in contact with the heating element.
4.
Close the cover until it clicks, if it necessary.
5.
Connect the device to the mains.
6.
Press “Select Program” button and choose the Deep Fry function.
7.
Press the START button to begin the cooking process, the display will flash
the characters: ---
8.
The cooking time is set microprocessor cooking process will end
automatically, but you can stop it by pressing keep warm / CANCEL.
Automatic minimum cooking time: 30 minutes. You can change it by pressing
the cooking time.
9.
Disconnect the unit from the mains.
PROGRAM “HEATING MILK"
1.
Prepare the necessary ingredients and keep ready.
2.
Make sure that all the ingredients (including liquid) were below the MAX, is
located inside the bowl.
3.
Insert the cup into the housing. Gently turn it counter-clockwise, make sure
that the cup is in contact with the heating element.
4.
Close the cover until it clicks. If the lid is not closed properly, the program will
be on the preparation work correctly.
5.
Connect the device to the mains.
6.
Press “Select Program” button and choose the Heating Milk function.
7.
Press the START button to begin the cooking process, the display will flash
the characters: ---
8.
The cooking time is set microprocessor cooking process will end
automatically, but you can stop it by pressing keep warm / CANCEL.
Automatic minimum cooking time: 3 minutes. You can change it by pressing
the cooking time.
9.
Disconnect the unit from the mains.
PROGRAM "STEAM"
1.
Pour 500-550 ml water into a bowl.
2.
Place the provided Steamer Basket into the bowl, as shown in the figure.
3.
Prepare all the food, wash them and cut. Evenly spread out in Steamer Basket
www.vitesse.ru
