Мультиварки Vitesse VS-595 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
ingredients (including liquid) were below the MAX, is located inside the bowl.
3.
Insert the Bowl into the housing. Gently turn it counter-clockwise, make sure
that the bowl is in contact with the heating element. Close the cover until it
clicks.
NOTE: If the cover is not completely closed, the program will not work
correctly.
4.
Close the Cover until it clicks. Connect the device to the mains.
5.
Press “Select Program” button and choose the Milk/Porridge Function
6.
Press the START button to begin the cooking process, the display will flash
the characters: ----
The cooking time is set by microprocessor and the cooking process will end
automatically, but you can stop it by pressing keep warm / CANCEL.
Automatic minimum cooking time: 30 minutes.
7.
At the end of the cooking process you will hear a beep and the Multi-Cooker
will automatically switch to Keep Warm mode: Milk / Porridge Function LED
goes out and Keep Warm LED will keep flashing.
8.
Click on the keep warm / CANCEL to turn off the appliance and open the lid.
9.
Despite the fact that the appliance is willing to maintain the temperature of
food for 8 hours or more, do not leave food in this mode for a long time, it can
lead to drying of the product.
10.
Disconnect the unit from the mains
PROGRAM "SOUP"
1.
Prepare the necessary ingredients and keep ready.
2.
Make sure that all the ingredients (including liquid) were below the MAX, is
located inside the bowl.
3.
Insert the cup into the housing. Gently turn it counter-clockwise, make sure
that the cup is in contact with the heating element.
4.
Close the cover until it clicks. If the lid is not closed properly, the program will
be on the preparation work correctly.
5.
Connect the device to the mains.
6.
Press “Select Program” button and choose the Soup Function
7.
Press the START button to begin the cooking process, the display will flash
the characters: ---
The cooking time is set microprocessor cooking process will end
automatically, but you can stop it by pressing keep warm / CANCEL.
Automatic minimum cooking time: 30 minutes. You can change it by pressing
the cooking time.
8.
Disconnect the unit from the mains.
P/7
P/8
4.
Close the Cover until it clicks. Connect the device to the mains.
5.
Press “Select Program” button and choose the Pilaf Function
6.
Press the START button to begin the cooking process, the display will flash
the characters: ----
The cooking time is set by microprocessor and the cooking process will end
automatically, but you can stop it by pressing keep warm / CANCEL.
7.
At the end of the cooking process you will hear a beep and the Multi-Cooker
will automatically switch to Keep Warm mode: PILAF Function LED goes out
and Keep Warm LED will keep flashing.
8.
Click on the keep warm / CANCEL to turn off the appliance and open the lid.
9.
Despite the fact that the appliance is willing to maintain the temperature of
food for 8 hours or more, do not leave food in this mode for a long time, it can
lead to drying of the product.
10.
Disconnect the unit from the mains.
PROGRAM "FRY"
1.
Prepare the necessary ingredients and keep ready.
2.
Make sure that all the ingredients (including liquid) were below the MAX, is
located inside the bowl.
3.
Insert the cup into the housing. Gently turn it counter-clockwise, make sure
that the cup is in contact with the heating element.
4.
Close the cover until it clicks. If the lid is not closed properly, the program will
be on the preparation work correctly.
5.
Connect the device to the mains.
6.
Press “Select Program” button and choose the Fry Function
7.
Press the START button to begin the cooking process, the display will flash
the characters: ---
The cooking time is set microprocessor cooking process will end
automatically, but you can stop it by pressing keep warm / CANCEL.
Automatic minimum cooking time: 5 minutes. You can change it by pressing
the cooking time.
8.
Disconnect the unit from the mains.
PROGRAM "MILK PORRIDGE"
1.
Measure the cereal as per the desired prescription. Rinse with clean with
water before cooking.
2.
Put all the ingredients in a bowl according to our recommendations. You can
also use your recipe milk porridge, following the proposed sequence of
actions and recommendations for the quantity. Make sure that all the
www.vitesse.ru
