Bosch MUC11W12RU - Инструкция по эксплуатации - Страница 13

 13

 en

Changing presettings

my mode

Manual cooking with individual settings for 

the preparation time and temperature.

■

Once the appliance has been switched 

on, in function selection mode, button 

B

 and the indicator 

[мой режим] 

(my mode) are permanently lit. Button 

G

 flashes. “00:00” lights up in the 

display.

■

Press button 

F

 once. “00:00” flashes in 

the display. 

■

Keep pressing, or press and hold, 

button 

F

 until the desired preparation 

time is displayed.

■

Press button 

C

 once. “00c” flashes in the 

display. 

■

Keep pressing, or press and hold, 

button 

C

 until the desired preparation 

temperature is displayed.

■

Press button 

G

 to start or continue 

the preparation programme with the 

individual values.

■

The appliance heats up the pan until the 

target temperature is reached. 

■

Once the target temperature is reached, 

the lines go out and the preparation time 

is shown in the display. The preparation 

process starts automatically. 

Changing presettings

Depending on the programme, the pre-

configured values for temperature, time or 

start time delay can be changed according 

to your individual needs.

The values are set by pressing the 

applicable button. The values will change 

faster if the button is pressed and held 

down. Once the maximum value of a setting 

has been reached, the display will jump 

back to the minimum value.

Setting a start time delay

Depending on the preparation program, the 

time until the programme is started can be 

set. 

■

Select the preparation programme.

■

Press button 

A

. Button 

G

 flashes. 

A pre-configured value flashes in the 

display. 

■

Pressing button 

A

 increases the time 

displayed. 

■

Press button 

G

 when the desired start 

time delay is displayed.

■

The desired start time delay is shown in 

the display. 

[таймер] (timer)

 lights up in 

the display. 

■

The time until the start counts down. 

The preparation process starts 

automatically after this. 

Please note:

■

The start time delay can be switched 

off at any time by pressing button 

G

. 

The preparation programme then starts 

immediately.

■

If a pre-configured time does not flash 

in the display, a start time delay cannot 

be set for the selected preparation 

programme. 

Setting the preparation 

temperature

The temperature can be individually 

changed either before or during preparation.

■

Before preparation:

In function selection mode, keep 

pressing button 

D

 until the desired 

preparation programme is selected. 

■

Press button 

C

 once. The pre-configured 

preparation temperature flashes in the 

display. 

■

During preparation:

Press and hold button 

C

. The current 

preparation temperature is briefly shown 

on the display.

■

Change the values: 

Press button 

C

repeatedly, or press and hold it until 

the desired preparation temperature is 

reached. 

■

Press button 

G

 to start or continue 

the preparation programme with the 

individual values.

Note:

 If button 

G

 is not pressed, the 

preparation programme will continue with 

the temperature that was previously set.