Bosch MUC11W12RU - Инструкция по эксплуатации - Страница 12

12 

en 

Use 

Some programmes consist of several 

programme steps. The respective 

programme step is shown in the display. 

Once a step is finished, a recurring signal 

tone sounds and the display and button 

G

 flash. Add ingredients depending on 

the recipe, and press button 

G

 again. The 

following preparation step will start.

Depending on the programme selection 

or the preparation step, the lid should be 

closed or open. Please see the AutoCook 

app for more details here.

Selecting and starting the 

programme

Warning!

– Do not fill the pan beyond the marking 

[4.0 litres]!

– Use only plastic utensils for stirring (do 

not use metal utensils).

Important:

 Take note of the safety 

instructions at the beginning of the manual.

X

Image sequence 

E

1. 

Keep pressing button 

D

 until the 

desired preparation programme is 

selected. The corresponding LED 

lights up in the control panel and the 

pre-configured preparation time for 

the selected preparation programme 

flashes.

2. 

Press button 

E

 to change the 

pre-configured preparation time. 

The display changes from 

[средняя] 

(medium) to 

[длинная] (long)

 and then 

to 

[короткая] (short) 

before returning to 

[средняя] (medium)

. The pre-configured 

preparation time is shown in the display.

3. 

Open the lid and add the required 

ingredients depending on the recipe.

4. 

Depending on the preparation 

programme, close the lid.

5. 

Press button 

G

 to start the preparation 

programme. 

6. 

The appliance heats up the pan until the 

target temperature is reached. During 

the heating phase, lines that light up 

in a clockwise direction appear in the 

display. 

7. 

Once the target temperature is reached, 

the lines go out and the remaining 

preparation time is shown in the display. 

Note:

 For programmes with several 

preparation steps, once the target 

temperature has been reached or once the 

preparation step is completed, a signal tone 

sounds. Add further ingredients and press 

button 

G

 to start the next preparation step. 

8. 

When the preparation programme ends, 

a signal tone sounds, and the indicator 

[готово] (finished)

 and button 

G

 light 

up. The display flashes and shows 

“00:00”.

Note:

 For some programmes, once 

complete, the keep warm function is 

automatically activated. The indicator 

[подогрев] (keep warm)

 lights up.

9. 

Press button 

B

 to switch to standby 

mode. Disconnect the mains plug.

10. 

Serve the finished dish and let the 

appliance cool down completely.

■

Once it has cooled down completely, 

clean all of the parts. 

X

 “Cleaning and 

maintenance” see page 15

Prematurely terminating the 

current preparation step 

If the ingredients are cooked ahead of time 

during one of the preparation steps, the 

step can also be terminated manually. 

■

Press button 

G

 for at least 2 seconds. 

■

This will terminate the current 

preparation step. A signal tone will then 

sound once the next step can be carried 

out. 

■

In the control panel, LEDs 1, 2, 3 or 4 

are shown accordingly and button 

G

flashes.

■

Press button 

G

 to start the next 

preparation step. 

Prematurely terminating the 

preparation programme

■

Press button 

H

 to end the preparation 

programme.